User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- List of References
- Overview Of Subscriber Station
- Installation of Subscriber Station
- Aperto Installation Manager
- Specifications
- Event Reporting
- Cables, Spares and Accessories
- Command Line Interface (CLI)
- Virtual Local Area Network
- Troubleshooting
- LIMITED EQUIPMENT WARRANTY (“Agreement”)
F–6
PacketMax 100 User Manual, 10007306, Rev J
Chapter F. Troubleshooting
other (o) :iProEth0
value = 0 = 0x0
SS Main>
j. Shutdown the ftp server on your laptop by closing the wsftp32.exe
k. Reboot SS by disconnecting the power supply to power brick and con-
necting it back
l. Check if SS comes up on its own by doing a telnet to 192.168.2.100 on
port 5000 by typing the following commands information on the dos
prompt of your PC after you hear the long beep sound of ARM1 reboot.
- telnet 192.168.2.100 5000
- login:- isp
- password:- isp
m. If your telnet session lets you login you have successfully set the bootpa-
rameters.