User's Manual

2–7
PacketMax 100/300 User Manual, 10007306, Rev J
Chapter 2. Installation of Subscriber Station
Figure 2-5 Attaching Base Support of the ODU to Inner Pole Support
Figure 2-6 Installed PacketMax 100-ODU
Step 2. Position the Outdoor Unit.
To achieve correct polarization, it is not possible to switch polarization using software.
This can be done only by making physical changes to the subscriber station installa
-
tion.
Vertical Polarization
Under normal circumstances the Subscriber station will be installed in a vertical polar-
ization format. The orientation of the PM 100/300 is so that the CAT5e cable connec-
tion is located at the bottom of the PM 100/300 as can be seen in Figure 2-7.
M8X50 Screw
M8 Lock
washers
M8 Flat washers