User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- List of References
- Overview Of Subscriber Station
- Installation of Subscriber Station
- Aperto Installation Manager
- Specifications
- Event Reporting
- Cables, Spares and Accessories
- Command Line Interface (CLI)
- Virtual Local Area Network
- Troubleshooting
- LIMITED EQUIPMENT WARRANTY (“Agreement”)
F–4
PacketMax 100 User Manual, 10007306, Rev J
Chapter F. Troubleshooting
Figure F-2 IP settings page
d. Copy the following files from build 72 to a temporary directory:
- c:\temppm-100_upgrade\arm0_ss1_0_0.D
- c:\temppm-100_upgrade\arm1_vxWorks.D
- c:\temppm-100_upgrade\ arm1_bootrom.bin
e. Start ftp server and create user called vxuser and password vxuser with
home directory pointing to c:\temp. If you are using tornado’s ftpd server
start ftpserver by running wftpd32.exe.
f. Select the Security menu item and than Users/rights and the sub menu
under that. Create new user called vxuser with password of vxuser and
home directory c:\temp (
Figure F-3 ).