User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- List of References
- Overview Of Subscriber Station
- Installation of Subscriber Station
- Aperto Installation Manager
- Specifications
- Event Reporting
- Cables, Spares and Accessories
- Command Line Interface (CLI)
- Virtual Local Area Network
- Troubleshooting
- LIMITED EQUIPMENT WARRANTY (“Agreement”)
B–2
PacketMax 100 User Manual, 10007306, Rev J
Chapter B. Event Reporting
B.1 ALarms and Events
NOTE: Events are highlighted in brackets in the following tables.
B.2 PacketMax 100/300 and PacketMax 5000 Events
Table B-1 SS related Alarms
Alarm Type Alarm Message
in EMS
Cause Resolution
Memory System RAM Free :
LOW
System RAM Free :
NORMAL [Event]
/RAM0 Space Free:
LOW
/RAM0 Space Free:
NORMAL [Event]
This indicates the
memory status of the
system.
Contact Aperto
Ethernet Port Link
Change
SS Uplink Ethernet
Port Change
Change in Ethernet
settings
Check Network con-
nections
Radio Frequency
Error
Radio Frequency
Configuration Error
Radio Frequency
Properly Configured
[Event]
Incorrect Frequency
Programmed
Reconfigure the radio
& check radio
Cfg File Parse Status SS Cfg File Parse
Failure
SS Cfg File Success-
fully Parsed [Event]
Config file is not gen-
erated correctly.
Re-check your config-
uration.
Table B-2 SS Events
CPE Mac Addr:<Mac Addr> Wait for DSA/DSC Acknowledge Timer Expired
CPE Mac Addr:<Mac Addr> Initial Ranging Success
CPE Mac Addr:<Mac Addr> Ranging Aborted
CPE Mac Addr:<Mac Addr> Re Range Request
CPE Mac Addr:<Mac Addr> SS search for preamble Timer expired