User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- List of References
- Overview Of Subscriber Station
- Installation of Subscriber Station
- Aperto Installation Manager
- Specifications
- Event Reporting
- Cables, Spares and Accessories
- Command Line Interface (CLI)
- Virtual Local Area Network
- Troubleshooting
- LIMITED EQUIPMENT WARRANTY (“Agreement”)
A–1
PacketMax 100 User Manual, 10007306, Rev J
Specifications
A.1 General Specifications
1.1.1 Models
PacketMax 10X/30X — Bridging mode ;VLAN; up to 5/250 hosts and 8/14 unidirec-
tional traffic service flows per subscriber.
1.1.2 Interfaces
The PacketMax 100/300 CPEs provide data and/or voice connectivity to the user
through its internal unit (IDU). The internal interface between IDU and ODU uses
Power over Ethernet (PoE) to provide data as well as power to the external ODU.
Network interface (IDU): 10/100 Base T (RJ45), PoE (802.3af compliant)
External antenna Connector (ODU): N-connector (for extended range mod-
els only)
1.1.3 Power requirements
100 to 240 V AC, 47 to 63 Hz
Consumption: 15.4 W (maximum)
A