User's Manual

3–6
PacketMax 100/300 User Manual, 10007306, Rev J
Chapter 3. Aperto Installation Manager
the BS’s WSS number and the BS ID (name); the others will be determined
automatically using the BS.DAT file. Steps 2 to 3 may be skipped.
2. In the Configuration Window, if a configuration file has been imported then a
different screen will show up, as in
Figure 3-4. If a file has not been imported
earlier, select the frequency band of the wireless link from the drop-down menu,
as in
Figure 3-5. (This selection must match the frequency band of the Packet-
Max 5000.)
Figure 3-4 BS and WSS selection
.
Figure 3-5 Configuration Window: General