User's Manual
Table Of Contents
- Scope of This Manual
- Conventions Used in This Manual
- Intended Audience for this Manual
- General Cautions and Warnings
- List of References
- Overview Of Subscriber Station
- Installation of Subscriber Station
- Aperto Installation Manager
- Specifications
- Event Reporting
- Cables, Spares and Accessories
- Command Line Interface (CLI)
- Virtual Local Area Network
- Troubleshooting
- LIMITED EQUIPMENT WARRANTY (“Agreement”)
3–1
PacketMax 100/300 User Manual, 10007306, Rev J
Aperto Installation Manager
This chapter provides instructions for using the Aperto Installation Manager (AIM) util-
ity. The AIM can be used to perform any of the following functions:
Initially configure the PacketMax 100/300 and optimize antenna alignment.
Re-align the antenna of a previously-installed PacketMax 100/300.
View wireless link status.
Perform ping tests of the wireless link between the PacketMax 100/300 and the
base station.
Pre-provision (pre-configure) a PacketMax 100/300 for later installation.
This chapter covers the following topics:
Aperto Installation Manager Requirements
Installing the AIM Software on the PC
Connecting to the PacketMax 100
Working with the Aperto Installation Manager
Aperto Installation Manager Troubleshooting
Buzzer in AIM
NOTE: The instructions and screenshots in this chapter showing PacketMax
100 applies to PacketMax 300 as well. Please ensure that the correct model
number is chosen during AIM installation
3