User's Manual

CHAPTER 8. MANAGEMENT INTERFACES
8–22070-20000340-01 Rev A
Fault Reporting
The subscriber fault reporting functions include an event log and email configuration,
as shown in Figure8-25 and Figure8-26.
Event Log Page
The event log page, shown in Figure8-25, includes all logable events reported by the
subscriber Indoor Unit.
NOTE: The data base used to generate the log is updated in real time. However, the
pages do not update dynamically; you must click on the Refresh button to see later
status.
You can empty the log by clicking on the Clear All Events button.
Figure8-25 Subscriber Event Log Page