User's Manual

CHAPTER 6. BSU AND S UBSCRIBER CONFIGURATION
6–14070-20000340-01 Rev A
Radio Parameters
Click on the Radio tab so that the screen illustrated in Figure6-5 is displayed. Specify
radio parameters as indicated in Table6-E.
Multiple Subnet Parameters
Click on the Multiple Subnet tab so that the screen illustrated in Figure6-6 is
displayed.
Specify the WSS IP address and subnet mask for the first (and typically only) subnet,
as indicated in Table6-F. Click on the save icon when you are finished.
You must specify at least one subnet and mask before generating the WSS config-
uration file.
If desired, create another subnet by clicking on the new instance icon. Specify the
WSS IP address and subnet mask for the new subnet. Click on the save icon when
you are finished.
Repeat for as many subnets as desired.
CD Packet Parameters
CD Packet parameters are not supported in R1P1.
Preamble Parameters
A configurable preamble is not supported in R1P1.