User's Manual

CHAPTER 6. BSU AND S UBSCRIBER CONFIGURATION
6–30070-20000340-01 Rev A
Table6-N CPE — Service Flow Upstream Parameters
Parameter Range
(and Default)
Comments
Configured Service Flow
Reference
Identifies service flow
displayed (1 to 64)
Select from drop-down menu. (Menu identifies all
service flows which have been created. Maximum
may be less than 64 depending on)
Service Class Name Best Effort, CIR, CBR
(Best Effort)
Select the class of service for this service flow from
the drop-down menu. (Must be the same for both
upstream and downstream.)
Number of Polling Slots 0 to 255
(10)
Not supported in R1P1.
Token Bucket Size 0 to 25000 kbytes
(1522)
Specify the size of the token bucket for this service
flow.
No. of ARQ Retransmis-
sions
0 to 255
(5)
Not supported in R1P1.
Max. Null Count (CBR Only) 0 to 255
(10
Not supported in R1P1.
Unsolicited Grant Pending
Wait
0 to 100 frames
(20)
Specify the grant waiting period for this service flow.
Normal Grant Interval 5 to 100 ms
(10)
Not supported in R1P1.
Grant per Interval 0 to 127 grants
(1)
Not supported in R1P1.
IP TOS Overwrite 0 to 65535
(0)
Not supported in R1P1.
Peak Data Rate Menu: 64 to 8192 kbps
(0/BE & CIR, 64/CBR)
Specify the peak data rate for this service flow
Min. Reserved Traffic Rate Menu: 64 to 8192 kbps
(blank)
If the service class is CBR, specify the minimum
data rate for this service flow
Active QoS Timeout 0 to 100 frames
(20)
Specify the active QOS timeout for this service flow.
ARQ State ARQ On:
ARG Off, Return ACKs;
ARQ Off, No ACKs
(ARQ On)
Not supported in R1P1.
Request/Transmission Pol-
icy
0 to 255
(0)
Not supported in R1P1.
Grant Pending Wait 0 to 100 frames
(20)
Not supported in R1P1.
Unsolicited Grant Size 0 to 100 frames
(20)
Not supported in R1P1.