User's Manual

CHAPTER 6. BSU AND S UBSCRIBER CONFIGURATION
6–22070-20000340-01 Rev A
Figure6-10 SNMP Menu
Table6-J BSU — SNMP Parameters
Parameter Range
(and Default)
Comments
Total Configured Hosts 1 to 32 Read-only field indicating how many SNMP hosts
have been specified.
Send Trap Yes or No
(Yes)
Specify whether SNMP traps will be sent to trap-
enabled hosts (per Access Right configurations).
Host ID 1 to 32 (increments as
instances are opened)
Identifies the SNMP host being configured.
Access Right readOnly, readWrite,
roWithTraps,
rwWithTraps,
trapsOnly
(readWrite)
Specify the access the SNMP host will have
Host IP Address xxx.xxx.xxx.xxx decimal
(0.0.0.0)
Specify the IP address of the SNMP host.
Read Community Up to 79 characters
(public)
Specify the name of the community which will have
read access to the BSU.
Write Community Up to 79 characters
(private)
Specify the name of the community which will have
write access to the BSU.