User's Manual

6–21070-20000340-01 Rev A
CHAPTER 6. BSU AND S UBSCRIBER CONFIGURATION
Figure6-9 MAIN — Bridging/Clustering Menu
Table6-I BSU — MAIN — Bridging/Clustering Parameters
Parameter Range
(and Default)
Comments
WSS Clustering Enable or Disable
(Disable) *
Specify whether WSSs will be clustered. If Disable
is specified, the Cluster fields will be unavailable.
Cluster I Any 2 or more config-
ured WSS ports
Select a configured WSS, and then click on the clus-
ter in which it will be included.
Cluster II Any 2 or more config-
ured WSS ports
Cluster III Any 2 or more config-
ured WSS ports
CPE-to-CPE Bridging Enable or Disable
(Enable) *
Specify whether bridging between subscribers in the
same WSS/cluster will be enabled.
* If WSS Clustering is to be enabled, CPE-to-CPE Bridging must be enabled.