Instruction Manual

- 13 -
5.5.3. Time setting for timing measurement (P2)
(a) Short press <MODE> key in mode P2 to enter into mode P3. See picture (4-3)
(b) Press < UNIT > key, the “ ” will move to the right and flash. Press <▲> or
<▼> key to change when the number is flashing.
(c) Press < MODE > key to enter into next parameter setting or press < ENTER > key to
conform and return to measuring mode.
(d) Factory setting is 0 second.
Note：in the form of “ ”, on the left side of “：” is minute, and its maximum setting
is 99; on the right side of “
：” is second, its maximum setting is 59. After set timing
measuring mode, icon will appear on the LCD screen.
5.5.4. Temperature unit ˚C/˚F setting (P3)
(a) Short press <MODE> key in mode P2 to enter into mode P3, see picture (4-4)
(b) Press <▲> or <▼> key to choose temperature unit: ˚C or ˚F.
(c) Press < MODE > key to enter into next parameter setting or press < ENTER > key to
conform and return to measuring mode.
5.5.5. Date setting (P4)
(a) Short press <MODE> key in mode P3 to enter into mode P4, see picture (4-5)
(b) Press < UNIT > key, the number will move rightward and flash，press < ▲ > or <▼> key
to alter the number. The upper right is month-day and the lower right is year.
(c) Press < MODE > key to enter into next parameter setting or press < ENTER > key to
conform and return to measuring mode.