User Manual

2
Thank you for purchasing Apera Instruments PC60 Premium Multi-parameter Tester. Please read this
manual before use in order to properly use and maintain the product.
For video tutorials, please go to support.aperainst.com
Table of Contents
1 What’s in the Kit ................................................................................................................... 3
2 Keypad Functions .................................................................................................................. 3
3 Preparation Before Use ......................................................................................................... 4
4 pH Calibration ....................................................................................................................... 4
5 pH Measurement................................................................................................................... 6
6 Conductivity Calibration ........................................................................................................ 6
7 Conductivity Measurement.................................................................................................... 7
8 Probe Cleaning ...................................................................................................................... 8
9 Probe Storage ....................................................................................................................... 8
10 Parameter Settings ............................................................................................................ 8
11 Technical Specifications ..................................................................................................... 9
12 Probe Replacement .......................................................................................................... 10
13 Battery Replacement ....................................................................................................... 10
14 Troubleshooting Guide ..................................................................................................... 11
15 Warranty ......................................................................................................................... 12
ATTENTION
• Water droplets are added during production to maintain the moisture of the probe. This is normal
practice and should not be attributed to used product.
• Never use the product when it’s freezing cold. Let it warm to room temperature before using.
• The latest PC60 Tester comes with an upgraded probe structure equipped with a sensor shield that
prevents glass bulb breakage from accidental collisions (see picture below). Users can remove the
shield when cleaning the sensor and put it back on after cleaning.