Installation manual

55
Programmable room stat
Installation & User Instructions
Installation Instructions
Product Specification
Installation
Cable Access and Wiring
Installer Advanced Programming Options
User Instructions
What is a Programmable Room Thermostat
Preset programmes
Setting Date and Time
Changing Preset Programmes
User overrides
Advanced User Programming Options
Overview of Installer Selectable Features
Setting References
Index
Please Note:
This product should only be installed by a qualified electrician or competent heating installer and should be in
accordance with the current edition of the IEEE wiring regulations.
Product specification
Thermostat features TP5000 Si TP5000-RF Si TP5000M Si TP5000M 24 Si
Power supply 2 x AA/MN1500/LR alkaline cells 230V, ±15%, 50Hz 24V, ±15%, 50Hz
Memory back-up Retained for life of product
Temperature Range Sensing 5-30°C
Factory set calendar clock Automatic summer/winter time change
Switching action of output relay 3(1)A, 10-230V N/A 3(1)A, 10-230V, Type 1B
Transmission frequency (RF models) N/A 433.92MHz N/A N/A
Transmission range (RF models) N/A 30m max. N/A N/A
Remote sensor inputs (A models only) Can be set by installer for remote temperature sensor, limit sensor, window contact or
telephone activated switch contacts
Dimensions (mm) 110 wide, 88 high, 28 deep
Design standard EN60730-2-9 (EN300220 for RF)
Rated impulse voltage 2.5kV
Ball hardness test 75°C
Control pollution situation Degree 2
Temperature accuracy ±1°C
Time accuracy ±1 minute per month
Important note RF products: Ensure that there are no large metal objects, such as boiler cases or other large
appliances, in line of sight between the transmitter and receiver as these will prevent communication between
thermostat and receiver.