Installation manual

54
If it is necessary to fully reset the unit, including the date
and time, follow the instructions below.
1. Press and hold the +1HR and MAN buttons on the left
hand side of the product.
2. Press the RESET button and hold for 3 seconds.
3. Release the RESET button. The display will change to
show the current time
4. Finally, release both the +1HR and MAN buttons.
The unit is now fully reset and must be re-programmed,
see pages 47-49.
Making a Full Reset
Example
No Hot WaterNo Heating
Fault Check List
7 day hot water programmer