Installation manual

1. Press PROG once until SET ON TIME appears at the

top of the display.

Use the + OR - buttons to set the time you want your

system to first come on in the morning (Event 1).

2. Press NEXT ON/OFF to move to Event 2.

Continue programming the system ON and OFF times

by pressing:

a) NEXT ON/OFF button to move to the next setting,

b) + or - buttons to amend the time,

3. Press the PROG button to return the unit to RUN

mode (time appears & colon in the display begins to

flash).

4. Proceed as below.

Programming the ON/OFF Times in 24 hour mode

To run the programme:

press the SELECT

Each time you press the

SELECT button the display will

change between ON, OFF,

ALLDAY and AUTO.

Running your Programme

• AUTO = the system will come on and go off at the

programmed times.

• ON = the system will remain on constantly.

• OFF = the system will not come on.

• ALLDAY = the clock will turn the system on at the

first programmed ON and will leave it on until your

last programmed OFF.

Select the option you require depending on your

circumstances, time of year, etc.

SELEC

7 day hot water programmer