Installation manual

47
The TS715-Si allows you to switch your system on and
off at times that suit you.
You can programme up to 3 separate ON/OFF times per
day.
Your timeswitch
Your TS715-Si comes ready programmed with a set
of operating times which often suit most people.
If you want to change any of these settings, you can do so
by following the instructions on pages 48-51. First, follow
the steps below and on page 48 to set the correct time
and date.
Preset Programmes
Open the flap on the front of the clock. Press the RESET
button using a non-metallic object (e.g.
Pencil/matchstick) until you hear a click and the red
light on the front of the unit comes on and the LCD goes
blank.
This will reinstate the preset programmes and sets
correct day and time.
To fully reset the unit see page 54.
Before you start
Press and hold DAY/HOL & NEXT ON/ OFF for 2 seconds
to toggle between 24hr clock and AM/PM display, as
required.
Choice of 24hr or AM/PM display
"Event No." "Hot Water & Heating" Mon-Fri Sat-Sun**
1 1st ON 06:30 07:30
2 1st OFF 08:30 10:00
3* 2nd ON* 12:00* 12:00*
4* 2nd OFF* 12:00* 12:00*
5 3rd ON 17:00 17:00
6 3rd OFF 22:30 22:30
"* Not applicable if unit set to 2 ON/OFFs per day by installer
**Not applicable if unit set to 24 hour mode by installer
See page 48 for explanations of different settings"
DAY/HOL
DAY/HOL
7 day hot water programmer