Datasheet

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
E-Mail: [e-mail] - Web site: http://www.apem.fr (check out our cross reference list on-line)
APEM, Customer Service, B.P.1, 82303 Caussade Cedex, France - Tel: [phone] - Fax: [phone]
9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES
Right angle p.c. terminals - butt action contacts
Series Terminals Number Electrical Bracket/
case height of poles funtion terminals
Model Structure:
'BUILD YOUR OWN SWITCH' ORDER FORMAT
Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.
(Allowable options are shown under each respective box).
Note: 'NONE' indicates box may be left empty.
Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.
Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply
selecting from all available options shown and filling in the boxes.
9
Single pole
2 Normally closed (NC)
3 Normally open (NO)
Gold plated
brass (standard)
Options:
(NONE) Epoxy sealed
terminals (standard)
K Front panel sealing
with two 'o'-rings
Contact materials Sealing Actuator
Example of completely specified
model number: 9233YCD
ACTUATOR OPTIONS
Case height: .314" (8mm)
2......Straight p.c. terminals, threaded bushing...........................................(NONE)
2......Straight p.c. terminals, tall bracket, smooth bushing..........................Y
2......Right angle p.c. terminals, bracket, smooth bushing.........................W W
5......Solder lug terminals, threaded bushing............................................. (NONE)
Case height .240" (6.1mm)
1......Straight p.c. terminals, threaded bushing .279" (7.1mm) to panel.....(NONE)
1......Straight p.c. terminals, short bracket, smooth bushing......................Y
1......Right angle p.c. terminals, bracket, smooth bushing.........................W W
2......Straight p.c. terminals, threaded bushing, .350" (8.9mm) to panel....N
2......Straight p.c. terminals, tall bracket, smooth bushing......................... N Y
5......Solder lug terminals, threaded bushing............................................. N
3
(NONE) Standard
0 Flush
4 Long
CD
(NONE) Standard 0 Flush 4 Long
Caps available separately -
see option drawings
9133WWCD
Normally open
C13
Although most
combinations of
options are available,
some may result in
incompatibilities.
Consult factory if
there is any question.
(.096 DIA)
2.45 DIA
(.137)
3.50
(.098 DIA)
2.5 DIA
4.70
(.185)
2.45 DIA
(.096 DIA)
3.00 DIA
(.118 DIA)
EPOXY
3.00
2.45 DIA
5.08
7.60
5.08
6.5 DIA
0.60
5.08
10.16
2.54
(.100)
(.400)
(.200)
(.255 DIA)
(.200)
(.023)
(.200)
(.299)
(.118)
(.096 DIA)
(.015)
0.40
(.106)
(.137)
3.50
(.400) (.100)
10.16 2.54
(.023)
(.023)
0.60
0.60
2.70
1.10 DIA
(.043 DIA)
(.127)
3.25