Datasheet
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
E-Mail: apem@midiway.fr - Web site: http://www.apem.fr (check out our cross reference list on-line)
APEM, Customer Service, B.P.1, 82303 Caussade Cedex, France - Tel: +33 (0) 5 63 93 14 98 - Fax: +33 (0) 5 63 93 19 03
C10
9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES
FEATURES
MATERIALS
Contacts & Terminals: Gold plated brass
Actuator: Polyamide,glass filled
Bracket: Tin plated steel
Case: PPS
Bushing: Nickel plated brass
Terminal seal: Epoxy
Hardware: Threaded bushing models supplied with 1 Hex Nut p/n U544. See drawing -
end of section.
● Single pole panel and p.c. mounting models.
● Normally open (NO) & normally closed (NC) electrical functions.
● Self-cleaning or butt action contacts.
● Ultra-compact case size.
Solder lug terminals - threaded bushing - self-cleaning contacts
SPECIFICATIONS
Contact ratings (resistive loads): 100 mA at 30 VDC
Initial contact resistance: 30 milliohms maximum
Insulation resistance: 1000 megohms minimum at 500 VDC
Dielectric strength: 500 V rms min. between terminals. 1000 V rms between terminals & case
Electrical life: 9100, 9200N & 9500N: 250,000 cycles min. 9200 & 9500: 100,000 cycles min.
Operating temperature range: -30°C to +65°C
Travel 9533 & 9233 9532 & 9232 9533N, 9233N & 9133
Total .062" (1.60mm) .070"(1.80mm) .035"(0.9mm)
Pre- .029"(0.75mm) .039"(1.00mm) -
Over- .027"(0.70mm) .029"(0.75mm) -
9532CD Normally closed
9533CD Normally open
(.096 DIA)
(.137)
(.118)
(.314)
(.100)
(.255 DIA)
(.078)
(.118)
(.157 DIA X 0.70 IS)(.157 DIA X 0.70 IS)
EPOXY
2.45 DIA
2.54
2.00
6.50 DIA
4.00 DIA X 0.70 SI4.00 DIA X 0.70 SI
3.50
3.00
8.00
3.00
(.007)
0.18