Data Sheet

www.chproducts.com
TS series
Hall effect miniature proportional joystick
OPTION SELECTION
Note: The company reserves the right to change specifications without notice. The graphs are provided for representational puroses only.
NOTES:
Mounting accessories. Standard hardware includes:
• For the Drop-in option - 4 push in connectors,
drop-in bezel and an O-ring.
• For the Rear mount option - 4 x 1/2 FH SS Phil
Screws and a rear mount bezel.
* 1 - Wires are thick, robust, and best suited for stand alone applications.
2 - Wires are thin and best suited for tightly constrained wire routing.
** Contact factory for PWM configuration.
*** Only available on dual output.
* Force applied to the top of the castle cap.
** All options are IP68 and IP69K rated, however Drop-in mounting does not prevent panel ingress.
HANDLE
-0 None
-1 Castle
-2 Winged Hat
-3 Conical
-4 FT1
-A All
TERMINATION*
1 22AWG 25cm PTFE
2 28AWG 25cm PTFE
3 Customer specified
LIMITER
U Single axis
S Square
G Guided feel
P Plus
MOUNTING
HARDWARE
N None
D Drop-in
R Rear mount
A All options
SERIES
OUTPUT OPTIONS
00 0V to 5V (Rail to Rail)
01 0.25V to 4.75V
02 0.5V to 4.5V
03 1V to 4V
04 0V to 5V - Sensor 1
0V to 5V - Sensor 2
05 0.25V to 4.75V - Sensor 1
0.25V to 4.75V - Sensor 2
06 0.5V to 4.5V - Sensor 1
0.5V to 4.5V - Sensor 2
07 1V to 4V - Sensor 1
1V to 4V - Sensor 2
08 0V to 5V - Sensor 1
5V to 0V - Sensor 2
09 0.5V to 4.5V - Sensor 1
4.5V to 0.5V - Sensor 2
10 0.25V to 4.75V - Sensor 1
4.75V to 0.25V - Sensor 2
11 1V to 4V - Sensor 1
4V to 1V - Sensor 2
12 Customer specified
13 PWM**
14 USB
15 Joyball (Cursor emulation)
POWER SUPPLY
OPTIONS
A Single
B Independent***
TS
MECHANICAL (FOR X, Y AXES)
Operating Force – 3.1N±0.5N (0.70lbf±0.11lbf)*
Maximum Vertical Load – 200N (45lbf)*
Maximum Horizontal Load – 150N (33.7lbf)*
Mechanical Angle of Movement – ±25° (50° total)
Life Cycles – >1 million
Mass/weight – 18.25g ± 5.0g (0.64oz±0.18oz)
Lever Action (Centering) – Spring centering
ENVIRONMENTAL
Operating Temperature – -40°C to +85°C (-40°F to +185°F)
Storage Temperature – -40°C to +85°C (-40°F to +185°F)
Sealing – IP68, IP69K**
EMC Immunity Level – EN61000-4-3
EMC Emissions Level – EN61000-6-3:2001
ESD – EN61000-4-2
ELECTRICAL SENSOR
Resolution – 1.22mV
Supply Voltage Range – 5.00V±0.01V
Reverse Polarity Max – -10V
Overvoltage Max – 20V
Output Impedance – 2Ω
Return to Center Voltage Tolerance – ±200mV initial
SPECIFICATIONS