Datasheet

R17.17
(0.063)
11.94
(0.47)
Ø25.02
(0.985)
x 2
METAL THREADED HOUSING - DROP-IN OPTION CUTOUT DIMENSIONS
METAL THREADED HOUSING - DROP-IN CUTOUT
24.64
(0.97)
Ø25.65
(1.01)
Ø2.87
(0.113)
24.64
(0.97)
CHAMFERED
FOR #4 FLAT
HEAD SCREW
(4 PLACES)
1.00 (0.04) x 45º
CHAMFER
PLASTIC HOUSING - REAR MOUNT OPTION CUTOUT DIMENSIONS
REAR MOUNT
BEZEL
4 x 1/2 FH SS PHIL SCREW
PLASTIC HOUSING - REAR MOUNT OPTION CUTOUT
NEW OPTIONS AVAILABLE
PLASTIC HOUSING - DROP-IN CUTOUT
PLASTIC HOUSING - DROP-IN OPTION CUTOUT DIMENSIONS
Ø2.87
(0.113)
Ø25.65
(1.01)
24.64
(0.97)
24.64
(0.97)
DROP-IN
BEZEL
O-RING
4 x PUSH IN CONNECTORS
• The under panel depth for the Plastic Threaded
Housing configuration is 14.55 mm (0.573 in).
• Mounting nut can be tightened to a
recommended torque of 10 lbf.
• The under panel depth for the Drop-in
configuration is 16.02 mm (0.631 in).
• The maximum panel thickness for the Rear
Mount configuration is 2.032 mm (0.08 in).
• Mounting screws can be driven to a
recommended torque of 4 lbf.
• The under panel depth for the Metal Threaded
Housing configuration is 14.55 mm (0.573 in).
• Mounting nut can be tightened to a
recommended torque of 10 lbf.
MOUNTING
PLASTIC THREADED HOUSING - DROP-IN CUTOUT
TS series
Proportional miniature thumb controls •
non-contacting Hall effect technology
R17.17
(0.063)
NUT
2X
25.02
(
0.985)
11.94
(0.470)
FIG. 5
PLASTIC THREADED HOUSING
25.02
.985
11.94
.470
2X R1.6
.063
25.02
.985
11.94
.470
2X R1.6
.063
LED ILLUMINATION OPTION H HANDLE
3
JOYSTICKS