Datasheet
• Operating Force: 3.1 N ± 0.5 N (0.70 lbf ± 0.11 lbf)
2
• Maximum Vertical Load: 200 N (45 lbf)
2
• Maximum Horizontal Load: 150 N (33.7 lbf)
2
• Mechanical Angle of Movement: 50° X & Y axis (subject to
limiter plate)
• Expected Life: 1 million cycles
• Mass/Weight: 18.25 g ± 5.0 g (0.64 oz ± 0.18 oz)
• Lever Action (centering): Spring
MECHANICAL SPECIFICATIONS
WIRING SPECIFICATION
(Termination options 1 & 2)
Black
Ground & button common,
or LED common
Red Power (5 V)
1
Blue X axis output (alpha)
Yellow Y axis output (alpha)
Orange
Pushbutton switch (option 6 handle)
or LED supply (option H handle)
2
2
Blue/White Stripe X axis output (beta)
Yellow/Black Stripe Y axis output (beta)
Red/White Stripe Power (5 V) (beta)
Black/White Stripe Ground (beta)
CONNECTIONS
• Electrical Life: 100,000 cycles
• Rating: 50 mA, 12 VDC.
• Terminal: Brass with silver plating
• Contact Resistance: 100 mΩ max
• Insulation Resistance: 100 MΩ min. 500 VDC
• Dielectric Strength: 250 VAC /1 minute
• Contact Arrangement: 1 pole 1 throw
• Stop Strength: Max 3 kgf vertical static load for 15
seconds
• Operating Temperature: -25 °C to +70 °C
(-4 °F to +158 °F)
• Storage Temperature: -30 °C to +85 °C
(-22 °F to +158 °F)
• Vibration Resistance: MIL-STD-202F METHOD
201A
• Shock Resistance: MIL-STD-202F METHOD 213B
PUSHBUTTON SWITCH
SPECIFICATIONS
(OPTION 6 HANDLE)
• Body: Glass filled nylon
• Threaded Housing: Black oxide plated brass
• Boot: Silicone
• Handles:
1, 2, 3, E, F, G - Glass filled nylon
4, 5, 6, 7, 8 - Silicone
B, C, D - Thermoplastic elastomer
H - Polycarbonate
APEM products may be recycled at end-of-life for the re-claiming of valuable metal
components.
MATERIALS
Proportional miniature thumb controls •
non-contacting Hall effect technology
TS series
1
All options are IP68 and IP69K rated, however drop-in mounting does not prevent
panel ingress.
2
Force applied to the top of the castle cap.
LED SPECIFICATIONS
(OPTION H HANDLE)
1
Hall sensor and LED supply (LED control option 1)
2
User controllable (LED control option 2)
LED CONTROL OPERATING VOLTAGE OPERATING CURRENT
1 – ON, driven by
joystick supply
voltage
- 6 mA
2 – User
controlled
5 V 6 mA
2
JOYSTICKS