Datasheet

www.apem.com
SN series
Hall effect T-bar fader
OPTION SELECTION
MECHANICAL
ELECTRICAL SENSOR
SPECIFICATIONS
HANDLE
S Barrel Handle
N Bullet Handle
POLARITY
S Standard
R Reversed
GAIN
01 ±50%xV
02 ±40%xV
03 ±30%xV
04 ±25%xV
05 ±10%xV
OUTPUTSERIES
1 Analog
2 PWM
SN
Operating Force – 0.5N
Mechanical Angle of Movement – 63˚(±31.5˚from center)
Expected Life – 1 Million Operations
Mass/Weight – 65g
Package Size (mm) (L x W x H) or (Dia x H) – 75 x 96 x 42mm
Lever Action (Centering) – Friction Clutch
Sensor – Hall effect
Output at Center – V/2 ± (5% x Gain)
Power Supply – 5V ± 0.5V Transient free
Reverse Polarity Max – -10VDC
Overvoltage Max – 20VDC
Output Voltage – 0V to 5V (See gain options)
Output Impedance – 10Ω
Current Consumption Typ – 13mA
Typ – Greater than 100K
ENVIRONMENTAL
Opearting Temperature – -20ºC to +70ºC (-4ºF to +158ºF)
Storage Temperature – -40ºC to +70ºC (-40ºF to +158ºF)
Sealing (IP) – Not sealed. For internal applictions only.
MATERIALS
Body – Mineral filled nylon - Black
Lever – Acetyl - Black
Handle – Aluminum - Silver anodized
Screening Plates – Mild Steel - Zinc plated
Notes: All values are nominal.
All specifications shown are based on a standard configuration and are provided for guidance only.
Please contact factory for assistance on how to achieve the best performance from your chosen configuration.
The company reserves the right to change specifications without notice.
OUTPUT VOLTAGE POLARITY
Low Voltage Low VoltageHigh Voltage High Voltage
Standard Reversed
Solder LugsSolder Lugs
Barrel Handle Bullet handle