Datasheet

ManualsBrandsAPEM ManualsSwitches & ButtonsJoystick 20 Vdc Lever (straight) Solder lug 1 pc(s)

The SN series is a precision fader control designed and built to meet the demands of the broadcast

industry. Contactless Hall effect technology, using the latest generation sensors, results in reliable

noise-free operation. A smooth consistent feel is achieved by utilizing steel ball races and PTFE bearing

surfaces. The SN series is available with analog linear voltage or PWM outputs, having a range of

factory configured gain settings. The mechanical design is complemented by two aluminum handle

options in “Barrel” and “Bullet” styles.

www.apem.com

SN series

Hall effect T-bar fader

KEY FEATURES

Consistent smooth feel

Precision ball race bearings & PTFE guides

Latest generation Hall effect sensor

12 bit resolution

“Barrel” or “Bullet” aluminum handles

Analog voltage or PWM output options

Absolute positioning

Industry standard mounting

Summary of content (4 pages)

PAGE 1
SN series Hall effect T-bar fader The SN series is a precision fader control designed and built to meet the demands of the broadcast industry. Contactless Hall effect technology, using the latest generation sensors, results in reliable noise-free operation. A smooth consistent feel is achieved by utilizing steel ball races and PTFE bearing surfaces. The SN series is available with analog linear voltage or PWM outputs, having a range of factory configured gain settings.
PAGE 2
SN series Hall effect T-bar fader OPTION SELECTION SN SERIES POLARITY OUTPUT HANDLE Barrel Handle 1 Analog S Standard S Barrel Handle 2 PWM R Reversed N Bullet Handle OUTPUT VOLTAGE POLARITY GAIN 01 Standard ±50%xV 02 ±40%xV 03 ±30%xV 04 ±25%xV 05 ±10%xV Bullet handle Low Voltage Reversed High Voltage Solder Lugs High Voltage Solder Lugs SPECIFICATIONS MECHANICAL Operating Force Mechanical Angle of Movement Expected Life Mass/Weight Package Size (mm) (L x W x H) or (Dia x
PAGE 3
SN series Hall effect T-bar fader DIMENSIONAL DRAWINGS Front View Front View Front View 19.60 (0.77) Ø15.50 (0.61) 42.00 (1.65) Ø4.30 (0.169) 5.00 (0.197) 58.90 (2.32) 22.00 (0.866) 7.60 (0.30) 95.50 (3.76) 32.50 (1.27) 36.60 (1.44) Magnetic Screening Plates Solder Lugs 3 places: 1. +5V 2. Output 3. Ground 6.35 (0.25) 2 places 75.00 (2.95) Installation Dimensions 7.00 (0.276) 65.00 (2.56) 2 off holes Ø3.20 (0.
PAGE 4
SN series Hall effect T-bar fader CONFIGURATION OPTIONS VOLTAGE (V) GAIN OPTIONS + + A + A + A (+ MAX A 2.5 A MECHANISM The SN series utilizes high quality ball bearings at the pivot point of its lever and uses a PTFE friction clutch assembly to create a smooth, damped, put and stay feel of the lever to ensure a consistent feel over the life of the product. POWER SUPPLY The SN series is designed to be powered by a regulated 5V+/-0.5V power supply.