Datasheet
Ø22 mm panel mount LED indicators
BUILD YOUR PART NUMBER
Q22 series
ABOUT THIS SERIES
Notice: please note that not all combinations of above numbers are available.
* please refer to the forward
voltage in electrical
specifications
• Gold faston terminal denotes anode (+), silver terminal denotes
cathode (-)
• Standard wire length is 200 mm, 22 AWG UL1007, red wire
denotes anode (+), black wire denotes cathode (-) for other wire
lengths consult APEM
• For leds with alternative voltages please consult Apem
• 110 VAC and 220 VAC, short body terminal options, 5, 6 and 7
please consult the factory
• Take care when soldering to the faston terminals (recommended
solder temperature 300 °C - 3 sec)
• Pin and Wire options are epoxy sealed at the rear of the bezels,
termination options 4 and 5
• Standard tri-color faston terminals are two anodes (+) and one
cathode (-)
• Tri-color wires are one red (+) and one green (+) anode and one
black (-) cathode
• Tri-color pins are center (–) cathode, shortest (+) anode pin
green, longest (+) anode pin red
• Daisy chaining option - has negative (Cathode) terminals linked
(3 x Fastons), solder lugs only
• Lamp test facility option 4 x solder lug/Faston only
• We recommend using superbright leds for use at 110 VAC and
220 VAC
SERIES
Q
MOUNTING HOLE
22
Ø22mm
Metal
P
Prominent
R
Recessed
F
Flush
Y
Chamfer*
Plastic
PP
Prominent
FP
Flush
BEZEL STYLE
1
Solder Lug/ Fastons
(2.8 x 0.8)
4
Rear epoxy Pins
5
Rear epoxy Wires
6
Short body Pins
7
Short body Wires
TERMINALS
LED COLOR
XX
Fixed Light
KK
Flashing Light
(only 12VDC)
YY
Bi-color
ZZ
Tri-color
TYPE OF ILLUMINATION
02
no resistor*
06
6VDC
12
12VDC
12A
12VAC/DC
24
24VDC
24A
24VAC/DC
28
28VDC
28A
28VAC/DC
110
110VAC
220
220VAC
VOLTAGE
(Blank)
Unsealed
E
IP67
SEALING
DL
Daisy Chain
LT
Lamp Test
OPTIONS
R
Red
G
Green
Y
Yellow
B
Blue
W
White
SR
Super Bright
Red
SG
Super Bright
Green
SY
Super Bright
Yellow
RG
Red/Green
RY
Red/Yellow
GY
Green/Yellow
RYG
Red/Yellow/
Green
Metal
C
Bright Chrome
B
Black Chrome
G
Satin Grey
S
Stainless Steel
Plastic
BP
Black
BEZEL FINISH
Anodized Flush
AR
Red
AG
Green
AY
Yellow
AB
Blue
AN
Black
* bezel finish : only with option
"S" and "Anodized Flush"
3
LED INDICATORS