Datasheet

15
www.apem.com
Q-SERIES 16mmØ Panel Mounting LED Indicator
Ordering Overview
STANDARD OPTIONS
Q 16 F 1 G XX Y 24 E
• GoldFastonterminaldenotesAnode(+),silverterminaldenotesCathode(-)
• Standardwirelengthis200mm,22AWG,redwiredenotesAnode(+),blackwiredenotesCathode(-)
for other wire lengths consult APEM
• ForLEDswithalternatevoltagesconsultAPEM
• Bi-colourLEDs,byconnectingthegoldFaston(+)onecolourisproduced,
by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC
• TakecarewhensolderingtotheFastonterminals
• Shortbodypinsandwiresareonlyavailableupto28VDC
• TheTri-colourLEDhasredandgreenLEDswhenbothareconnectedyellowisproduced
• StandardTri-colourFastonterminalsaretwoAnodes(+)andoneCathode(-)
• Tri-colourwiresareonered(+)andonegreen(+)Anodeandoneblack(-)Cathode
• Tri-colourpinsarecentre(–)cathode,shortest(+)anodepingreen,longest(+)anodepinred
• Maximumpanelthickness11mm
• ForbehindpanelepoxysealingoptionpleaseconsultAPEM
• WerecommendusingSuperbrightLEDsforuseat220VAC
• Forresistorlessversions(02)pleasepayattentiontotheforwardvoltage
• Formulti-voltageoptionspleaseconsultApem
Q
Example Q16F1GXXY24E
Ø16mm, flush metal bezel, solder lug
terminals, satin grey finish, fixed light,
yellow, 24volt DC LED, IP67 Panel Seal
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
6 = Short body
Pins
7 = Short body
Wires
Metal
C = Bright Chrome
B = Black Chrome
G = Satin Grey
Plastic
CP = Bright Chrome
BP = Black
GP = Satin Grey
AU = Gold
R = Red
G = Green
Y = Yellow
B = Blue
W = White
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
02 = 2VDC
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(only up to 28VDC)
YY = Bi-colour
ZZ = Tri-colour
SERIES
MOUNTING
HOLE
16 = Ø16mm Metal
P = Prominent
F = Flush
Plastic
PP = Prominent
FP = Flush
BEZEL
STYLE
TERMINALS BEZEL FINISH
TYPE OF
ILLUMINATION
LED COLOUR VOLTAGE SEALING
The Q16 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.