Datasheet

BUILD YOUR PART NUMBER
Ø14 mm panel mount LED indicators
Q14 series
ABOUT THIS SERIES
Notice: please note that not all combinations of above numbers are available.
• Gold faston terminal denotes anode (+), silver terminal denotes
cathode (-)
• Standard wire length is 200 mm, 22 AWG UL1061, red wire
denotes anode (+), black wire denotes cathode (-) for other wire
lengths consult APEM
• For LEDs with alternative voltages and mutlit-voltage options
consult APEM
• 110 VAC and 220 VAC, short body terminal options, 5, 6 and 7
please consult the factory
• Bi-color leds, by connecting the gold faston (+) one color
is produced, by reversing the supply voltage another color is
produced – bi-colors are available up to 28 VDC
• Take care when soldering to the faston terminals (recommended
solder temperature 300 °C - 3 sec)
• Short body pins and wires are only available up to 28 VDC
• The Tri-color LED has red and green LEDs when both are
connected yellow is produced
• Standard tri-color faston terminals are two anodes (+) and one
cathode (-)
• Tri-color wires are one red (+) and one green (+) anode and one
black (-) cathode
• Tri-color pins are center (–) cathode, shortest (+) anode pin
green, longest (+) anode pin red
• We recommend using Hyperbright or Superbright LEDs for use
at 110 VAC and 220 VAC
LED COLOR
XX
Fixed Light
KK
Flashing Light
(12V – 28VDC)
YY
Bi-color
ZZ
Tri-color
TYPE OF ILLUMINATION
02
no resistor
06
6 VDC
12
12 VDC
12A
12 VAC/DC
24
24 VDC
24A
24 VAC/DC
28
28 VDC
28A
28 VAC/DC
110
110 VAC
220
220 VAC
VOLTAGE
(Blank)
Unsealed
E
IP67
SEALING
R
Red
G
Green
Y
Yellow
B
Blue
W
White
O
Orange
HR
Hyper Bright
Red
HG
Hyper Bright
Green
HY
Hyper Bright
Yellow
HO
Hyper Bright
Orange
SR
Super Bright
Red
SG
Super Bright
Green
SY
Super Bright
Yellow
SB
Super Bright
Blue
SW
Super Bright
White
RG
Red/Green
RY
Red/Yellow
GY
Green/Yellow
RYG
Red/Yellow/
Green
RGB
Red/Green/
Blue*
* Terminals option 5 and
common anode only
SERIES
Q
MOUNTING HOLE
14
Ø14mm
P
Prominent
R
Recessed
F
Flush
BEZEL STYLE
1
Solder Lug/
Fastons (2.8 x 0.8)
2
Pins
3
Wires
4
Rear epoxy Pins
5
Rear epoxy Wires
6
Short body Pins
7
Short body Wires
TERMINALS
BEZEL FINISH
OTHERS
C
Bright Chrome
B
Black
G
Satin Grey
ANODIZED
FLUSH
AR
Red
AG
Green
AY
Yellow
AB
Blue
AN
Black
(Blank)
Common cathode
-CA
Common anode
3
LED INDICATORS