Datasheet
Ø14 mm panel mount LED indicators
Q14 series
ELECTRICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max)
(Typical All
Types)
02 (No Resistor) 1.8 to 3.3 VDC 20 mA max
6 VDC 5.4 to 6.6 VDC 20 mA
12 VDC 10.8 to 13.2 VDC 20 mA
24 VDC 21.6 to 26.4 VDC 20 mA
28 VDC 25.2 to 30.8 VDC 20 mA
110 VAC 99 to 121 VAC 6 mA
220 VAC 207 to 235 VAC 3 mA
* Customer to supply resistor for desired operating
current.
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
Flush Forward Voltage
HE Red 80 mcd 10 mcd 2.0 V
Green 60 mcd 5 mcd 2.2 V
Yellow 50 mcd 4 mcd 2.1 V
Blue 540 mcd 100 mcd 3.3 V
White 1000 mcd 150 mcd 3.3 V
Orange 80 mcd 200 mcd 2.2 V
Bi-color (Typical)
(Red/Green)
15/15 mcd 14/10 mcd 2.0V/2.2 V
Tri-color (Typical)
(Red/Green/Yellow)
60/50/50mcd 15/10/30 mcd 2.0 V/2.2 V/2.1 V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is
produced.
STANDARD LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
Flush Forward Voltage
HE Red 17,000 mcd 2,000 mcd 2.2 V
Green 11,000 mcd 680 mcd 3.3 V
Yellow 4,000 mcd 350 mcd 2.0 V
Blue 2,500mcd 250 mcd 3.3 V
White 4,400 mcd 250 mcd 3.3 V
Orange 2,800 mcd 300 mcd 2.2 V
SUPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
Flush Forward Voltage
HE Red 2,800 mcd 800 mcd 2.1 V
Green 2,200 mcd 250 mcd 3.2 V
Yellow 1,300 mcd 250 mcd 2.0 V
Orange 850 mcd 200 mcd 2.1 V
HYPER BRIGHT LED INTENSITY
• The operating voltage must not be exceeded by
more that 10% as this will result in reduced life
expectancy
• Luminous intensity is measured at 20 mA on a
discrete led unless otherwise stated.
• Luminous intensities and color shades of white
LEDs may vary within a batch.
• Luminous intensity will be reduced with lower
operating current.
ADDITIONNAL INFORMATION ON LED COMPONENTS
ITEM SYMBOL CONDITION TYP.
DC Forward Voltage
V
F
(R) IF=20 mA 2.1
V
F
(B/G) IF=20 mA 2.1
Luminous Intensity
Iv (Red) 220 mdc
Iv (Green) 500 mdc
Iv (Blue) 100 mdc
CONNECTIONS
REAR EPOXY WIRES FOR RGB OPTION
13.0
0.512
16.0
0.630
4.75
0.187
13.5
0.531
17.5
0.689
210
190
8.268
7.480
M14 x 1.0 THREAD
BLACK ANODE +VE
RED CATHODE -VE
GREEN CATHODE -VE
BLUE CATHODE -VE
2
LED INDICATORS
RGB LED INTENSITY