Datasheet

APEM www.apem.com 7
PBA series
Piezo switches
Specifications
ENVIRONMENTAL SPECIFICATIONS
• Sealing : IP68 per IEC 529, IP69K per DIN 40050-9
(switches mounted on panel or not)
• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6
• Operating temperature : -40°C to +75°C
•
EMC compatibility according to EN 61058-1 for the whole range
• EMC compatibility according to EN 61000-4 & EN61000-6-2 for model
1A (code 002)
E
LECTRICAL AND GENERAL SPECIFICATIONS
• Max. current/voltage rating : 1A 24VAC/DC
or 200mA 24VAC/DC depending on version
• Switch resistance ON : 10Ω max.
• Switch resistance OFF : 5MΩ min.
• Operating force : 2 to 6N
• Life expectancy : 50 million cycles
• LED consumption : Illuminated dot : 10mA - Illuminated ring : 20mA
SEALING IP68 SEALING IP69K
MATERIALS
• Case : aluminium, anodized -
or stainless steel (303 or 316L)
or brass, chrome plated
• Multi-wire leads section 0,22 mm
2
l
ength 300 mm, twisted by pair
• Cable, length 300 mm, section
depending on switch model
• PC terminals : bronze, tin plated
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Tolerance : The general tolerance for dimensions in this brochure is ± 0,3 (.012).
Dimensions, specifications and data shown in this brochure are subject to change without notice.
➀ One-piece bushing
➁ Epoxy sealed terminals
➂ O-ring
Continuous immersion in water
IP68 test conditions
Continuous immersion in water
(1m, 24 hours)
IP69K test conditions
. Pressure : 80 - 120 bars
. Distance : 15 cm
. Temperature : 80°C ±
5°C
.
Flow : 14 - 16 l/mn
. Duration : 30 seconds per position
High pressure, high temperature wash down