Datasheet

ManualsBrandsApem ManualsPushbutton SwitchesPiezo switch Natural Aluminum 16.2 mm 1 Make Contact (NO) Series PBA

APEM www.apem.com B2-129

PBA series

Piezo switches

Specifications

❑

Bushing diameter 16 mm, 19 mm or 22 mm

❑

Sealed to IP68 and IP69K (switches mounted on panel)

❑

Easy to clean metal surface

❑

Very long life expectancy

❑

Ring or dot illumination

ENVIRONMENTAL SPECIFICATIONS

• Sealing : IP68 per IEC 529, IP69K per DIN 40050-9

(switches mounted on panel)

• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6

• Operating temperature : -40°C to +75°C

• EMC compatibility according to EN 61058-1 for the whole range

• EMC compatibility according to EN 61000-4 & EN61000-6-2 for model

1A (code 002)

ELECTRICAL AND GENERAL SPECIFICATIONS

• Max. current/voltage rating :

- Function A : standard 200mA 24VAC/DC - option 1A 24VAC/DC

- Function B : standard 100mA 24VAC

• Switch resistance ON : 10Ω max.

• Switch resistance OFF : 5MΩ min.

• Operating force : 2 to 6N

• Life expectancy : 50 million cycles

• LED consumption : Illuminated dot 10mA - Illum. ring 20mA (functions A-B-C)

• Power consumption for function 1 : non-illum.10mA - illuminated 30mA

SEALING IP68 SEALING IP69K

MATERIALS

• Case : aluminium, anodized

or stainless steel 316L

• Multi-wire leads section 0,22 mm

length 300 mm, twisted by pair

• Cable, length 300 mm, section

depending on switch model

• PC terminals : bronze, tin plated

1 m

➀ One-piece bushing

➁ Epoxy sealed terminals

➂ O-ring

Continuous immersion in water

IP68 test conditions

Continuous immersion in water

(1m, 24 hours)

IP69K test conditions

. Pressure : 80 - 120 bars

. Distance : 15 cm

. Temperature : 80°C

± 5°C

. Flow : 14 - 16 l/mn

. Duration : 30 seconds per position

High pressure, high temperature wash down

Note : to maintain the ESD performance,

always add a ground washer when the

panel is made of non-conductive material

(PVC, polycarbonate).

For part numbers, see «Mounting

accessories» on the following pages.

21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:54 Page129

Summary of content (16 pages)

PAGE 1
21-Serie PBA-A_24-Serie PBA-A.
PAGE 2
1-Serie PBA-A_24-Serie PBA-A.
PAGE 3
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:54 Page131 PBA series Piezo switches Ø 16 (.630) Overview PBA SERIES Bushing / operator Terminals All models with Ø 16 bushing R1 T5 R5 Flat operator, height 4,50 (.177) Flat operator, height 1 (.039) (non illuminated) Operator with finger location, height 4,50 (.
PAGE 4
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:54 Page132 PBA series Piezo switches Ø 16 (.630) Illuminated or non-illuminated • Operator Ø 18 mm (.708) Shown with flying lead terminals. Ø16.20 (.637 DIA) Non-illuminated, operator height 4,50 mm (.177) Flat PBAR1 Ø13.00 (.512DIA) 4.50 (.177) Ø18.00 (.708DIA) 20.00 (.787) 5.00 (.197) With finger location PBAR5 Ø16.00x1.00 SI (.630DIAx1.00 IS) 0.22mm 2 R1 R5 PBAR1AF2000 Ø18.00 (.708DIA) 10.00 (.394) Flat PBAT5 1.00 (.
PAGE 5
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:54 Page133 PBA series Piezo switches Ø 16 (.630) Options ELECTRICAL FUNCTION A B C 1 NO pulse NC pulse NO prolongated pulse - Ground connector U5735 compulsory, supplied with the switch. ON - OFF - Requires external power supply - Cannot be combined with T5 operator. Illumination type W only. TERMINALS 2.67 (.105) Flying leads Cable Straight PC (T5 model, non-illuminated, functions A and B only) 0.22mm 2 0.64 (.025) 3.17 (.125) F C P B2 2.54 (.
PAGE 6
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:54 Page134 PBA series Piezo switches Ø 16 (.
PAGE 7
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page135 PBA series Piezo switches Ø 19 (.748) Overview PBA SERIES Bushing / operator R9 RA Terminals Bushing Ø 19 (.748), flat operator, height 3 (.118) Bushing Ø 19 (.748), with chamfer, height 3 (.
PAGE 8
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page136 PBA series Piezo switches Ø 19 (.748) Illuminated or non-illuminated • Operator Ø 22 mm (.866) Shown with flying lead terminals. Ø19.20 (.756 DIA) Non-illuminated - operator height 3 mm (.118) 20.00 (.787) 2.00 (.079) 45° 3.00 (.118) Ø22.00 (.866DIA) Flat PBAR9 With chamfer PBARA Ø19.00x1.00 SI (.748DIAx1.00 IS) 0.22mm 2 R9 45° 20.00 (.787) Ø22.00 (.866DIA) 2.00 (.079) With standard illuminated ring - operator height 3 mm RA 3.00 (.
PAGE 9
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page137 PBA series Piezo switches Ø 19 (.748) Options TERMINALS F C Flying leads Cable 0.
PAGE 10
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page138 PBA series Piezo switches Ø 19 (.
PAGE 11
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page139 PBA series Piezo switches Ø 22 (.866) Overview PBA SERIES Bushing / operator Terminals All models with Ø 22 bushing R2 R6 RY RZ Flat, operator height 3 mm (.118) Not available w. illuminated ring. With finger location, operator height 3 mm (.118). Not available with illuminated ring. With chamfer, operator height 4,5 mm (.177). Available with thin or large illuminated ring only. Flat, operator height 4,5 mm (.177).
PAGE 12
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page140 PBA series Piezo switches Ø 22 (.866) Illuminated or non-illuminated • Operator Ø 28 mm (1.102) Ø22.20 (.874 DIA) 9.70 (.381) Ø22.20 (.874 DIA) 2.80 (.110) Wire colours : see “Electrical functions”. Non-illuminated - operator height 3 mm (.118) 3.00 (.118) 19.50 (.768) Flat PBAR2 Ø22.00 (.866DIA) 5.00 (.197) Ø28.00 (1.102DIA) Ø22.00x1.00 SI (.866DIAx1.00 IS) With finger location PBAR6 0.22mm 2 Ø20.70 (.
PAGE 13
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page141 PBA series Piezo switches Ø 22 (.866) Illuminated or non-iluminated RZ Ø13.50 (.531DIA) Ø13.50 (.531DIA) 4.70 (.185) 2 4.70 (.185) 0.22mm Ø20.70 (.815DIA) With chamfer PBARY Ø22.00x1.00 SI (.866DIAx1.00 IS) 4.00 (.157) 4.50 (.177) Flat PBARZ 30° 2.00 (.079) Ø28.00 (1.102DIA) 3.50 (.138) 20.00 (.787) With large illuminated ring - operator height 4,50 (.
PAGE 14
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page142 PBA series Piezo switches Ø 22 (.866) Options RATINGS 000 002 Standard 1A 24VAC or DC (NO pulse only, function A) TYPE OF ILLUMINATION / VOLTAGE B2 5V 12V 24V Microcontroller driven C D E Y F G H Z L P J V Dot illumination only available with LED colours 0B, 0G, 0S, 0Y, 0W and SG.
PAGE 15
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page143 PBA series ATEX approved piezo switches Distinctive features - Specifications - Overview ❑ Approved according to the ATEX 94/9/CE directive ❑ Sealed to IP66 (mounted on panel) ❑ Easy to clean metal surface ❑ Long life ❑ Illuminated models B2 ELECTRICAL SPECIFICATIONS MATERIALS • Rated voltage : 5V to 24 VAC/DC max. • Rated current : 200mA max. at 6VAC/DC 50mA max.
PAGE 16
21-Serie PBA-A_24-Serie PBA-A.qxd 21/11/12 16:55 Page144 PBA series ATEX approved piezo switches Illuminated or non-illuminated 1 = very high protection level - Highest classifications - Universal I = mines II 1 G D ; I M1 M1 = very high protection level II = surface industries Usage : mines full of fire damp and potentially explosive atmospheres of groups IIC,IIB et IIA in T4 temperature class and/or in the presence of combustible dust (T135°C). B2 Dia. 16 (.630) bushing - illuminated ring Ø16.