Datasheet

4/5
Directions for use
● Connect the colour-coded wires first (LIGHT), following by the power wires (POWER). Ensure no short
circuit cannot occur between connecting wires before you turn on the power.
● Each time a key on the remote is pressed, the indication light will blink, indicating that the selected
mode is functioning.
● Speed and brightness levels can be adjusted.
● Additional memory function works if power is lost and then restored.
● Using the 24 key RF remote control, the key functions are as follows:
Note：①”Brightness +” and “Brightness –“ keys are used to alter brightness levels but can also be used to
increase or decrease the speed of the FLASH, STROBE, FADE and SMOOTH functions.
Typical Application:
Symbol
Function /
Colour
Symbol
Function /
Colour
Symbol
Function /
Colour
Symbol Function / Colour
Brightness
+( 16 in all )
Brightness
-
( 1
6 in all )
Off On
Static red Static green Static blue Static white
Static
orange
Static pea
green
Static dark
blue
Strobe flash
Static dark
yellow
Static cyan Static brown
Fade in &fade out
Static
yellow
Static light
blue
Static pink
3 colors or 7 colors
gradually change
Static light
yellow
Static sky blue Static purple
3 colors or 7 colors
jump change