Datasheet

ManualsBrandsApem ManualsNon-Illuminated Pushbutton SwitchesPushbutton Switch, 100 mA, 28 VDC

• Max. current/voltage rating with resistive load:

- Gold plated contact (0): 100 mA 28 VDC, 1,000,000 cycles

- Silver contact (1): 2 A 28 VDC, 100,000 cycles

• Initial contact resistance : 100 mΩ max.

• Insulation resistance : 1 GΩ min. at 500 VDC

• Dielectric strength : 1,500 Vrms

• Contact bounce : 10 ms

ELECTRICAL SPECIFICATIONS

Backlighted marking in a compact case

Strong tactile feedback

NO or NC/NO

High sealing level, no space between actuator and

bushing (IP67/IP69K)

DISTINCTIVE FEATURES

• Operating and storage temperature : -40 °C to +85 °C (-40 °F to +185 °F)

• Front panel sealing : IP67 according to IEC 60529,

IP69K according to DIN 40050-9

• Shock resistance: 100 g according to IEC 512-4, test 6c

• Salt spray: IEC 512-6, test 11f

ENVIRONMENTAL SPECIFICATIONS

IX series

Pushbutton switches for harsh environments •

bushing Ø 12 mm • momentary NO & NC/NO

The company reserves the right to change specifications without notice.

LED COMPONENT SPECIFICATIONS

LED color Forward current Typ. forward voltage Max. forward voltage

Red (R) 20 mA 1.9 V 2.5 V

Yellow (Y) 20 mA 2.3 V 2.8 V

Green (G) 20 mA 4 V 4.5 V

Blue (B) 20 mA 3.2 V 3.7 V

White (W) 20 mA 3.3 V 4 V

Red/green (F) 20 mA Red: 2 V / green: 3.2 V Red: 2.8 V / green: 3.7 V

A resistor must be series-connected by the user.

Resistor value = supply voltage - LED forward voltage

LED forward current

PANEL SWITCHES

SW-IX-1807

Summary of content (5 pages)

PAGE 1
PANEL SWITCHES 07 18 -IX IX series SW Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary NO & NC/NO DISTINCTIVE FEATURES Backlighted marking in a compact case Strong tactile feedback NO or NC/NO High sealing level, no space between actuator and bushing (IP67/IP69K) ENVIRONMENTAL SPECIFICATIONS • Operating and storage temperature : -40 °C to +85 °C (-40 °F to +185 °F) • Front panel sealing : IP67 according to IEC 60529, IP69K according to DIN 40050-9 • Shock resistance: 10
PAGE 2
PANEL SWITCHES IX series Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary NO & NC/NO GENERAL SPECIFICATIONS • Panel thickness : 1.5 to 6 mm • Total travel : 2 mm (.078) ± 0.3 mm ELECTRICAL FUNCTION ILLUMINATED MODELS • Typical operating force : 7 N ± 2 N • Low level/mech. life : 1,000,000 cycles • Torque : 0.55 Nm (0.6 Nm max.) applied to nut • Soldering : 320 °C (608 °F) max. for 3 sec.
PAGE 3
Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary NO & NC/NO BUILD YOUR PART NUMBER BASIC PART NUMBER IX SERIES ELECTRICAL FUNCTION ACTUATOR SHAPES R Round, elastomeric membrane 3 Normally open (NO) 5 NC/NO combined TERMINALS CONTACTS S Solder lugs 0 Gold plated W 24 AWG wires 1 Silver OPTIONS LED COLORS ACTUATOR COLORS 1 Blue M Non-illuminated B Dark blue R Red 2 Black Y Yellow 3 Green G Green 4 Grey B Blue 5 Yellow W White 6 Red F R
PAGE 4
PANEL SWITCHES IX series Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary NO & NC/NO FLAT SOLDER LUG TERMINALS NON-ILLUMINATED - NO IXR3S••M FLAT SOLDER LUG TERMINALS NON-ILLUMINATED - NC/NO IXR5S••M FLAT SOLDER LUG TERMINALS ILLUMINATED - NC/NO IXR5S FLAT FLYING LEAD TERMINALS ILLUMINATED - NC/NO IXR5W 4
PAGE 5
Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary NO & NC/NO ACTUATOR COLORS BASIC P/N 1 B 2 3 4 Blue Dark blue Black Green Grey 5 6 7 9 Yellow Red White Orange LED COLORS BASIC P/N M R Y G B W F Non-illuminated Red Yellow Green Blue White Red/green MARKING STYLE BASIC P/N Blank R No marking Laser etched - Black actuator and white marking only MARKING BASIC P/N Blank XN9 XCD No Marking - Symbol "power" - Symbol "dot" Other marking on request 5 PANEL SWITCHES IX series