Information

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsPushbutton 250 Vac 0.2 A 1 x Off/(On) IP67 momentary 1 pc(s)

24 APEM www.apem.com

IZ series

Rear mounted sealed pushbutton switches - bushing Ø 16 mm - metal - latching

Distinctive features and specifications

❑

Rear mounting for easier installation

❑

Latching action metal models

❑

Fixed or variable panel thickness

❑

Sealed to IP67

❑

Illuminated or non-illuminated

❑

Flat actuator for optional marking

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing : IP67 according to IEC 60529

• Shock resistance : 100 g according to IEC 512-4, test 6c

• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d

• Salt spray : IEC 512-6, test 11f

• Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)

• Operating temperature : -40°C to +85°C

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

100mA 24VDC - 200.000 cycles

• Initial contact resistance : 100 m1 max.

• Insulation resistance : 1 G1 min. at 500VDC

• Dielectric strength : 1.500 Vrms between terminals

1.000 Vrms between terminals and frame

MATERIALS

• Case : thermoplastic UL94-V0

• Plunger :

polyamide

• Bushing/bezel : brass, nickel

plated

• Contacts : silver, gold plated

• Multi-wire lead AWG20,

section 0,6 mm

• LED wire : AWG26,

section 0,12 mm

• Lens : polycarbonate

• Terminal seal : epoxy

LED COMPONENT SPECIFICATIONS

LED colour

Forward current

Super red (L0S) 20mA

20mA

Typ. forward voltage Max. forward voltage

1,95V

3,2V

Yellow (L0Y)

Green (L0G)

Blue (L0B)

1,95V

2,05V

3,70V

A resistor must be series-connected by the user.

Resistor value =

supply voltage - LED forward voltage

LED forward current

On flying lead versions, the LED resistor can be integrated by APEM on request.

GENERAL SPECIFICATIONS

• Panel thickness :

- IZM : 3 mm (.118) max.

- IZN : 4 mm (.157) max.

• Total travel : 2,5 mm (.098) +/-0,3 mm

• Typical operating force : 5N +/- 2N

• Mechanical life :

200.000 cycles

• Torque : IZN : 1 Nm max.

IZM : 0,7 Nm max. applied to nut

• Soldering : 320°C max. for 3 sec.

PANEL CUT-OUT MATRIX MOUNTINGPANEL CUT-OUT

➀ Flat seal ➁ O-ring

IZM (adjustable hex nut) IZN (fixed hex nut)

(.157MAX)

(.637DIA)

Ø16.20

4.00 Maxi

3.00 Maxi

(.118MAX)

(1.063)

27.00

(1.063)

Ø16.20

(.637DIA)

05-Serie_IZ-metal-F1-A-pages24-28:08-Serie IP-A 1/02/10 14:01 Page 24