Information

APEM www.apem.com 11
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - latching
Distinctive features and specifications
❑
Latching action
Actuator remains in the low position when “ON”.
❑
Illuminated or non-illuminated
❑
Compact
Behind-panel depth less than 20 mm (.787)
❑
Flat round actuator for optional marking
❑
Sealed to IP67
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
4A 12VDC, 200.000 cycles
1A 48VDC, 200.000 cycles
2A 48VDC, 100.000 cycles
3A 48VDC, 75.000 cycles
1A 72VDC, 15.000 cycles
• Initial contact resistance : 100 m1 max.
• Insulation resistance : 1 G1 min. at 500VDC
• Dielectric strength : 1.500 Vrms between terminals
1.000 VAC rms between terminals and frame
MATERIALS
• Case : thermoplastic, UL 94-V0
• Actuator : polyamide 6/6
• Bushing/bezel : zinc die-cast
(zamak), black painted
• Contacts : silver, gold plated
• Multi-wire lead AWG20,
section 0,6 mm
2
• LED wire : AWG26, section 0,12 mm
2
• Lens : polycarbonate
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Panel thickness : 1,5 mm (.059) min.
5,5 mm (.217) max.
• Total travel : 2,5 mm (.098) +/- 0,3 mm
• Typical operating force : 5 N +/- 2N
• Mechanical life : 200.000 cycles
• Torque : 1,5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
LED COMPONENT SPECIFICATIONS
LED colour Forward current
Super red (L0S) 20mA
20mA
20mA
20mA
Typ. forward voltage Max. forward voltage
1,95V
2V
3,2V
3,2V
Yellow (L0Y)
Green (L0G)
Blue (L0B)
1,95V
2,05V
3,70V
4V
A resistor must be series-connected by the user.
Resistor value =
supply voltage - LED forward voltage
LED forward current
AGENCY APPROVAL
2A 125VAC/250VAC
File E83438
Availability : consult factory for
details of approved models.
Marking : to order switches marked
UL, complete appropriate box of
ordering format.
MOUNTING
Panel cut-out Matrix mounting Back of panel space requirement
Ø13.60
(.535DIA)
12.90
(.507)
(.531DIA)
ø13.50
1
1.50min-5.50Max
(.059 min-.216max)
20.00
(.787)
20.00
(.787)(.787)
20.00
(.751)
19.10
➀ O-ring
02-Serie_IPF1-A-pages11-14:07-Serie IPF1-A 1/02/10 14:01 Page 11