Datasheet

B1-16 APEM www.apem.com
B1
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Overview
I
P
SERIES
Actuator shapes
C Square
R Round, curved
P Round, flat
Terminals
S Solder lugs
F
Flying leads, standard
W Flying leads, thin NEW!
P Straight PC
Z1 Quick-connect
(non-ill., NO only )
Electrical functions
3 Normally open
(
NO)
5 NC/NO combined
(non-illuminated)
Actuator colours
1 Blue
B Dark blue
2 Black
3 Green
4 Grey
5 Yellow
6 Red
7/1 White
8 Bright chrome
9 Orange
A Satin chrome
Contacts
AD Silver, gold
p
lated (standard)
CD Brass, gold
plated (option 104)
LED colours
Blank Non-illum.
L0S Super red
L0Y Yellow
L0G Green
L0B Blue
L0W White
ABOUT THIS SERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
A sealing boot is available to protect the switches against frost and sand. It is presented after the IA series and in section H.
Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-ring.
Hex nut part number U166.
Packaging unit : 25 pieces
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Options
100 Satin chrome
bezel
101 Bright chrome
bezel
104 High actuator
(non-illum. round
models only)
Option 104
If combined with electrical function 5 (NC/NO), this
option should be ordered with CD contacts (brass, gold
plated). Current/voltage rating : 100mA 30VDC
Approval
UL
Consult factory for
detail of approved
models.