Datasheet

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsPushbutton 24 Vdc 2 A 1 x Off/(On) IP67 momentary 1 pc(s)

APEM www.apem.com 1

IL series

Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

Distinctive features and specifications

❑

Momentary pushbuttons for thick panels

❑

Illuminated or non-illuminated

❑

Tactile feedback

❑

Flat round actuator for optional marking

❑

Sealed to IP67

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing : IP67 according to IEC 60529

• Shock resistance : 100 g according to IEC 512-4, test 6c

• Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d

• Salt spray : IEC 512-6, test 11f

• Operating temperature : -40°C to +85°C

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

2A 24VDC, 200.000 cycles

• Initial contact resistance : 50 mΩ max.

• Insulation resistance : 1 GΩ min. at 500VDC

• Dielectric strength : 1.000 Vrms

MATERIALS

• Case : thermoplastic UL94-V0

• Actuator : polyamide 6/6

• Bushing/bezel : polyamide 6/6

• Contacts : silver, gold plated

• Terminal seal : epoxy

GENERAL SPECIFICATIONS

• Panel thickness : 1,50 mm (.059) min.

10 mm (.393) max

• Total travel :

1,7 mm (.067) +/- 0,3 mm

• Typical operating force :

4N +/- 2N

• Low level or mechanical life :

1.000.000 cycles

• Torque : 1 Nm max. applied to nut

• Soldering : 300°C max. for

3 seconds

MOUNTING

Panel cut-out Matrix mounting

Back of panel space requirement

➀ Flat seal

A resistor must be series-connected by the user.

Resistor value =

supply voltage - LED forward voltage

LED forward current

LED COMPONENT SPECIFICATIONS

LED colour

Forward current

Super red (L0S) 20mA

20mA

Typ. forward voltage Max. forward voltage

2,1V

3,2V

Yellow (L0Y)

Green (L0G)

Blue (L0B)

20mA 3,35V

2,3V

3,8V

4,25VWhite (L0W)

Tolerance : The general tolerance for dimensions in this brochure is ± 0,3 (.012).

Dimensions, specifications and data shown in this brochure are subject to change without notice.

Summary of content (5 pages)

PAGE 1
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Distinctive features and specifications ❑ Momentary pushbuttons for thick panels ❑ Illuminated or non-illuminated ❑ Tactile feedback ❑ Flat round actuator for optional marking ❑ Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS • Front panel sealing : IP67 according to IEC 60529 • Shock resistance : 100 g according to IEC 512-4, test 6c • Vibration resistance : 10-500 Hz - 10 g according to IEC 512-
PAGE 2
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Overview IL Electrical function Actuator shape SERIES Round, curved Round, flat R P 3 Normally open (NO) Actuator colour 1 2 3 4 5 6 7/1 8 9 B M Blue Black Green Grey Yellow Red White Bright chrome Orange Dark blue Brown LED colour Blank L0S L0Y L0G L0B L0W Non-illum.
PAGE 3
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Illuminated • Curved or flat actuator • Antirotation bushing 8.70 (.342) 4.55 (.179) 5.20 (.204) Straight P 1.00 (.039) MODEL STRUCTURE CIPCOSP C Actuator marking available on ILP models (symbol 10 mm max.). On request.
PAGE 4
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Non-illuminated • Curved or flat actuator • Antirotation bushing 8.70 (.342) 4.55 (.179) 5.20 (.204) Straight P 1.00 (.039) MODEL STRUCTURE CIPCOSP Actuator marking available on ILP models (symbol 10 mm max.). On request.
PAGE 5
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Custom switches Reduced bezel for compact matrix mounting - option X1242 • Dia. 15 (.590) reduced bezel • Mounting from the front into a threaded panel cut-out • Matrix mounting : 16 x 16 mm (.630x.630) • Illuminated or non-illuminated • Same terminal options and colours as standard models • Part numbers on request. ILP3FAD...X1242 Reduced bezel for compact matrix mounting - option 234 • Dia. 15 (.