Datasheet

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsPushbutton 28 Vdc 5 A 1 x Off/(On) IP67 momentary 1 pc(s)

APEM www.apem.com 1

IC series

Pushbutton switches for harsh environments - short case - bushing Ø 12 mm - momentary

Distinctive features and specifications

❑

Momentary with short case, reduced behind-panel depth

❑

Tactile feedback

❑

Flat round actuator for optional marking

❑

Glossy actuator option (round curved only)

❑

Sealed to IP67

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing : IP67 according to IEC 60529

• Shock resistance : 100 g according to IEC 512-4, test 6c

• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d

• Salt spray : IEC 512-6, test 11f

• Robustness : IK06 according to EN 50102 (1 joule)

• Operating temperature : -40°C to +85°C

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

5A 28VDC, 70.000 cycles

0,2A 48VDC, 500.000 cycles

0,5A 48VAC, 500.000 cycles

• Initial contact resistance : 50 mΩ max.

• Insulation resistance : 1 GΩ min. at 500VDC

• Dielectric strength : 1.500 Vrms 50 HZ between terminals

MATERIALS

• Case : thermoplastic UL94-V0

• Actuator :

polyamide

6/6

• Bushing/bezel : zinc die-cast

(zamac), black painted

• Contacts : silver, gold plated

• Multi-wire lead AWG20,

section 0,6 mm

• Terminal seal : epoxy

GENERAL SPECIFICATIONS

• Panel thickness : 1,5 mm (.059) min.

4 mm (.157 max.)

• Total travel : 1,7 mm (.067)+/- 0,3 mm

• Typical operating force : 4N +/- 2N

• Low level or mechanical life :

1.000.000 cycles

• Torque : 1,5 Nm max. applied to nut

• Soldering : 320°C max. for 3 sec.

MOUNTING

Panel cut-out Matrix mounting

Back of panel space requirement

Ø13.60

(.535DIA)

(.531DIA)

Ø13.50

12.90

(.507)

1.50min-4Max

(.059 min-.157max)

20.00

(.787)

20.00

(.787)(.787)

20.00

➀ O-ring

Tolerance : The general tolerance for dimensions in this brochure is ± 0,3 (.012).

Dimensions, specifications and data shown in this brochure are subject to change without notice.

Summary of content (4 pages)

PAGE 1
IC series Pushbutton switches for harsh environments - short case - bushing Ø 12 mm - momentary Distinctive features and specifications ❑ Momentary with short case, reduced behind-panel depth ❑ Tactile feedback ❑ Flat round actuator for optional marking ❑ Glossy actuator option (round curved only) ❑ Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS • Front panel sealing : IP67 according to IEC 60529 • Shock resistance : 100 g according to IEC 512-4, test 6c • Vibration resistance : 10-5
PAGE 2
IC series Pushbutton switches for harsh environments - short case - bushing Ø 12 mm - momentary Overview IC Electrical function Actuator shape SERIES Square Round, curved Round, flat Round curved with gloss finish C R P B 3 Normally open (NO) Actuator colour 1 2 3 4 5 6 7/1 8 9 A B Blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome Dark blue Terminals S F P Z1 Solder lugs Flying leads Straight PC Quick-connect Contacts AD Silver, gold plated Options 100 101 104 Satin chr
PAGE 3
IC series Pushbutton switches for harsh environments - short case - bushing Ø 12 mm - momentary Square Quick-connect Z1 1.00 (.039) MODEL STRUCTURE 3.40 (.133) 8.40 (.330) 2.40 (.094) Straight P 1.20 (.047) 2.80 (.110) CISCOSP ECH: 0.9 5-05-03 ➞ Flat Solder lug terminals CISCOSZ-A DESSIN ECH 0.
PAGE 4
IC series Pushbutton switches for harsh environments - short case - bushing Ø 12 mm - momentary Round Quick-connect Z1 1.00 (.039) MODEL STRUCTURE 8.40 (.330) 2.40 (.094) Straight P 1.20 (.047) 3.40 (.133) • Gloss actuator finish Curved actuator also available with gloss finish - replace ICR by ICB in the part numbers below. Not available with option 104 (high actuator). 2.80 (.110) CISCOSP ECH: 0.9 Actuator marking available on ICP models (symbol 10 mm max.). On request.