Datasheet

www.apem.com
HS series
Sealed 5-way switch based miniature joystick
OPTION SELECTION
Note: All values are nominal
The company reserves the right to change specifications without notice.
HANDLE
0 None
1 Castle
2 Winged Hat
3 Conical
4 Finger Tip
5 Round Jog
6 Pushbutton
7 Mushroom*
8 Low Profile* * = Not available with Threaded Housing (Mounting Option ”T”)
TERMINATION
1 1.00mm (0.039in)
Pitch Molex Connector
2 1.00mm (0.039in)
Pitch Molex Connector
with 10” Mating Harness
LIMITER
2 2-way
4 4-way
CONTACT
S Silver Plated
G Gold Plated
MOUNTING OPTIONS
N None
D Drop-in
R Rear Mount
A Drop-in and Rear Mount
T Threaded Housing
SERIES
HS A
SPECIFICATIONS
CURRENT/VOLTAGE RATING WITH RESISTIVE LOAD
CONTACT RATING LIFECYCLES
Gold plated (G) – 10mA @ 30VDC – 200,000 operations
Silver plated (S) – 100mA @ 30VDC – 100,000 operations
Mechanical life – 300,000 operations
Insulation resistance – Min 100MΩ (250VDC by insulation resistance meter)
Voltage withstand – 500VAC for 1 minute
Contact resistance – Max 200mΩ (by YHP4328A)
Electrical function – MOM-OFF-MOM
MECHANICAL
Operating Force – 5.56N±0.53N (1.25lbf±0.12lbf)
1
Maximum Vertical Load – 200N (45lbf)
1
Maximum Horizontal Load – 150N (33.7lbf)
1
Lever travel – 30° (±150)
Mass/weight – 17g (0.0375lb) (Option HS1DXXXA)
ENVIRONMENTAL
Sealing – IP68, IP69K²
Operating temperature – -250C to +800C (-13°F to +176°F)
PUSHBUTTON SWITCH SPECIFICATIONS (Option 6 Handle)
Electrical life – 100,000 cycles
Rating – 50 mA,12VDC
Terminal – Brass with silver plating
Contact resistance – 100 milliohms max.
Insulation resistance – 100 megohms min. 500VDC
Dielectric strength – 250VAC /1 minute
Contact arrangement – 1 pole 1 throw
Operation force – 1.5lbf
Stop strength – Max 3kgf vertical static load for 15 seconds
Operating temperature – -250C to +700C (-13°F to +158°F)
Storage temperature – -300C to +850C (-22°F to +185°F)
TERMINATION
Manufacturer – Molex
Manufacturer part number – 501331-0607
Product range – Pico-Clasp ™
Circuits – Six
Pitch – 1.00mm
Mating connector – Molex 501330-0600
NOTES:
1 Force applied to the top of the
castle cap.
2 All options are IP68 and IP69K
rated, however Drop-in mounting
does not prevent panel ingress.