Datasheet

ManualsBrandsAPEM ManualsSwitches & ButtonsJoystick 250 Vdc Lever (straight) Open end cable IP68 1 pc(s)

www.apem.com

HS series

Sealed 5-way switch based miniature joystick

KEY FEATURES

5-way with center pushbutton option

Positive tactile feedback

MOM-OFF-MOM action

Threaded bush mount option

Sealed to IP68 and IP69K

Connectorized housing

APEM’s HS series is a single pole, MOM-OFF-MOM micro switching joystick. Numerous button styles

are available and the HS series may be specified for 2-way, 4-way and 5-way operation. The HS series

is available with a threaded case or may be configured for rear or drop-in panel mounting and is well

suited for control grip integration.

Summary of content (4 pages)

PAGE 1
HS series Sealed 5-way switch based miniature joystick APEM’s HS series is a single pole, MOM-OFF-MOM micro switching joystick. Numerous button styles are available and the HS series may be specified for 2-way, 4-way and 5-way operation. The HS series is available with a threaded case or may be configured for rear or drop-in panel mounting and is well suited for control grip integration.
PAGE 2
HS series Sealed 5-way switch based miniature joystick OPTION SELECTION HS A HANDLE SERIES TERMINATION MOUNTING OPTIONS 0 None N None 1 Castle D Drop-in 2 Winged Hat R Rear Mount 3 Conical A Drop-in and Rear Mount 4 Finger Tip T Threaded Housing 5 Round Jog 6 Pushbutton 7 Mushroom* 8 Low Profile* 1 1.00mm (0.039in) Pitch Molex Connector 2 1.00mm (0.
PAGE 3
HS series Sealed 5-way switch based miniature joystick SPECIFICATIONS - continued OPTIONAL MATING HARNESS1 Wire type Connector – 28AWG 25cm PTFE – Molex 501330-0600 NOTE: 1 The HS Series tactile toggle switch is fitted with a six terminal Molex (501331-0607) connector. A mating harness is not included, but may be specified at the time of order for an additional charge. The 4-function harness is part number 505-508. The 5-function harness, necessary for the Option 6 Handle is part number 505-509.
PAGE 4
HS series Sealed 5-way switch based miniature joystick MOUNTING OPTIONS AND MOUNTING ACCESSORIES PLASTIC HOUSING – DROP-IN OPTION CUTOUT DIMENSIONS Ø2.87 (0.113) Ø25.65 (1.01) 4 x PUSH IN CONNECTORS 24.64 (0.97) DROP-IN BEZEL O-RING 24.64 (0.97) PLASTIC HOUSING – REAR MOUNT OPTION CUTOUT DIMENSIONS Ø2.87 (0.113) 4 x 1/2 FH SS PHIL SCREW Ø25.65 (1.01) CHAMFERED FOR #4 FLAT HEAD SCREW (4 PLACES) 24.64 (0.97) 1.00 (0.04) x 45º CHAMFER REAR MOUNT BEZEL 24.64 (0.