Datasheet

APEM www.apem.com 3
FD series
Double icon illuminated pushbuttons - bushing Ø 24 or 26 mm - momentary or latching
MODEL
STRUCTURE
• Solder lugs
• Flat actuator
T
o order a product, replace • with one of the codes selected under “LED control
and number of poles”
below, then add the desired options.
Mounting by threaded bushing - Ø 24 mm
LATCHING
FDAP1•1 OFF ON
MOMENTARY (NO)
FDAP3•1
➞
F
lat
Snap-in mounting - Ø 26 mm
LATCHING
FDBP1•1 OFF ON
MOMENTARY (NO)
FDBP3•1
➞
Flat
LED CONTROL AND NUMBER OF POLES
Complete the model numbers above with one of the following codes.
Independent LED
single pole
C
Function 3 (momentary)Function 1 (latching)
Independent LED
double pole
D
Green LED
in ON position
single pole
F
Function 1 (latching)
Red LED
in ON position
single pole
G
dotted line = jumper to
be wired by the user.
LED- has to be wired to
one pin of pole 2.