Datasheet

2 APEM www.apem.com
FD series
Double icon illuminated pushbuttons - bushing Ø 24 or 26 mm - momentary or latching
Overview
FD
S
ERIES
M
odels
A Threaded bushing,
dia. 24 mm
B Snap-in, dia. 26 mm
Actuator
P Round, flat
Electrical function
1 OFF - ON
3 Normally open (NO)
LED control and No of poles
C Independent LED, 1 pole
D Independent LED, 2 poles
F LED linked to actuator, green if switch
in ON position, single pole
G LED linked to actuator, red if switch
in ON position, single pole
F and G for OFF - ON models only.
Contact material
2 Silver
4 Silver, gold
plated
T
erminals
1 Solder lugs
Actuator color
8 Smoke black
ABOUT THIS SERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
Mounting accessories : Standard hardware supplied : 1 hex nut (threaded bushing version) and 1 panel gasket
Packaging unit : 20 pieces
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Bezel color
2 Black
LED colors
F Red/green
Symbols
See end of series
LED resistor
0 No resistor
supplied
1 12V resistor
2 24V resistor