Datasheet

APEMwww.apem.com
BH_JOYST1611R2US
Note: The company reserves the right to change specificaons without noce.
6
The BL is designed to be powered by a regulated 5V± 0.5V power supply. The outputs are raometric, making a stable,
noise free, power supply essenal. The power supply to the joysck should be carefully regulated to be within tolerance.
Should the power supply change outside of the specified tolerances, permanent damage may occur.
BH series
Paddle joystick controllers
Overview
The BH Series incorporates internal magnec screening to minimize the effect of external magnec fields. Mounng
or operang the Paddle close to strong magnec fields is not recommended. System designers should follow best pracce
when incorporang the BH Series Paddle into their products. Care should be taken to decouple the power supply properly
and to employ adequate EMC shielding.
When mounng the Paddle, care should be taken to site it in a posion that does not make vulnerable to damage when
in use. If the Paddle is intended for use in a handheld enclosure then care must be taken to protect the Paddle from
damage caused by dropping. For long term reliability, basic precauons should be implemented, such as mounng it at the
lightest end of the enclosure or by protecng it with a guard. The body of the Paddle, on the underside of the panel, must
not be subject to water spray, excessive humidity or dust.
POWER SUPPLY
MAGNETIC IMMUNITY AND SYSTEM DESIGN
MOUNTING
VOLTAGE OUTPUT OPTIONS
DUAL OUTPUT - CONFIGURATION 1
DUAL OUTPUT - CONFIGURATION 2
Output 1
Output 2
±50% ±40% ±30% ±25% ±10%
±50% ±40% ±30% ±25% ±10%
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
OUTPUT VOLTAGE (V)
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
(+2.5) 5.0
(+2.0) 4.5
(+1.5) 4.0
(+1.0) 3.5
(+0.5) 3.0
(+0.0) 2.5
(- 0.5) 2.0
(- 1.0) 1.5
(- 1.5) 1.0
(- 2.0) 0.5
(- 2.5) 0.0
OUTPUT VOLTAGE (V)
MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX
MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX MIN TRAVEL (º) MAX