Data Sheet

ManualsBrandsAPEM ManualsElectromechanicsJoystick 5 V Toggle Quick-connect IP67 1 pc(s)

APEM www.apem.com

Note: The company reserves the right to change specifications without notice.

BF series

Paddle controllers

Distinctive features and specifications

NOTES:

1. All parameters shown are based on a standard configuration and are provided for guidance only.

2. Please refer to APEM for assistance on how to achieve the best performance from your chosen configuration.

 IP67 sealed

 Sprung and detent lever options

 Available with color-coded inserts

 EMC & Magnetically shielded -

analog or PWM outputs

 Effectively zero below panel depth

 End stackable mounting

 Hall effect joystick and switch function

 Sculpted ergonomic design

 Next generation Hall effect technology

 5V operation - dual redundant outputs

as standard

 Two lever height variants

 Industry standard connector

MECHANICAL

• Materials Employed: Polyetherimide, Polycarbonate,

Stainless Steel

• Weight: 50g

• Mechanical Operating Angle: ± 25 Degrees

• Max Load to Mechanism:

Vertical: IK08 (BSEN62262:2002)

Horizontal: 75N (16.86lbf)

ENVIRONMENTAL

• Storage: -40°C to 70°C (-40°F to 158°F)

• Operating Temperature: -25°C to 70°C (-13°F to 158°F)

• Seal Above Panel: IP67 (Gasket fitted as standard)

• EMC Emissions: Complies with EN 61000-6-3:2001

CISPR 22:2005 Class B 30MHz - 11GHz

• Life Cycles: 5 million cycles sprung version only.

Detents rated to 2 million cycles

• ESD: Complies with EN61000-4-2 (extended)

±8KV (20 contacts) & +/-15KV (20 air discharges)

• EMC Immunity: 100V/m, 80MHz-2.7GHz,

1KHz 80% sine wave modulation,

EN 61000-4-3 (extended)

• Vibration: 100Hz - 200Hz @ 0.13g²/Hz, total 3.6gRMS

(1 Hour in each of the three mutually perpendicular axis)

ELECTRICAL

• Gain (Output Voltage Span): ±10% x V to ±50% x V

• Output at Center: V/2 ± (5% x Gain)

• Power Supply: 5V ±0.5V Transient free

• Switch Outputs: Open Drain, pulled high within

control via 1K5 to 5V, and smoothed to 0V with 100nF

• Sensor Type: Hall effect

• Current Consumption: <20mA

• Loads: Minimum 10K, preferred 100K+

Summary of content (6 pages)

PAGE 1
BF series Paddle controllers Distinctive features and specifications     Hall effect joystick and switch function Sculpted ergonomic design Next generation Hall effect technology 5V operation - dual redundant outputs     as standard   Sprung and detent lever options Available with color-coded inserts EMC & Magnetically shielded analog or PWM outputs   Two lever height variants Industry standard connector MECHANICAL Effectively zero below panel depth End stackable mounting ENVIRONMENTAL
PAGE 2
BF series Paddle controllers Overview Gain Paddle BF BD 74mm (2.91in) above the panel 50mm (1.97in) above the panel 10 25 30 40 50 ±10% x ±25% x ±30% x ±40% x ±50% x Insert Color V V V V V Configuration 1 2 3 Standard Dual Outputs Inverse Dual Outputs PWM BK RE BL YE GR Modifier Black Red Blue Yellow Green None Switching Points Lever Operation A01 D01 D02 D03 D04 SD1 SD2 SD3 SD4 00 Sprung to Center Center Detent 12.5 Degree Detents 12.
PAGE 3
BF series Paddle controllers Overview GENERAL DIMENSIONS 24.00 (0.95) 8 WAY CONNECTOR 2.54 (1.00) PITCH BF Ø3.00 (0.12) BD 74.00 (2.91) 50.00 36.00 33.00 (1.97) (1.42) (1.30) 50.00 (1.97) 7.50 (0.30) 7.50 (0.30) 34.00 (1.34) DROP IN MOUNTING - PANEL CUT-OUT & MOUNTING INSTALLATION The Paddle may be mounted with two different hole patterns: • Two screws – in line on the Y axis (shown as yellow screws) • Four screws – one in each corner (shown as silver screws) Ø3.20 (0.13) 1.20 (0.05) 16.
PAGE 4
BF series Paddle controllers Overview MECHANISM The brand new mechanism design has been developed for strength and long life while retaining a superb feel. SPRUNG TO CENTER The lever springs back to the center position when released. DETENT POSITIONS The lever ‘clicks’ into a number of preset positions. The internal switches can be configured to trigger at two of these points.
PAGE 5
BF series Paddle controllers Overview OUTPUT OPTIONS The BF series Paddle is configured as two “electrical” controls in one mechanical package. The Paddle operates from 5V and provides two proportional outputs. The second output is accurate to the first within ±3% of the power supply. The power supply for the secondary output is also completely independent. Customers may choose their preference of voltage outputs (gains). The secondary output can be of the same or inverse polarity to the primary wiper.
PAGE 6
BF series Paddle controllers Overview VOLTAGE OUTPUT OPTIONS DUAL OUTPUT - CONFIGURATION 3 ±50% OUTPUT VOLTAGE (V) (+2.5) 5.0 ±30% (+2.5) 5.0 ±25% (+2.5) 5.0 (+2.0) 4.5 (+2.0) 4.5 (+2.0) 4.5 (+2.0) 4.5 (+1.5) 4.0 (+1.5) 4.0 (+1.5) 4.0 (+1.5) 4.0 (+1.5) 4.0 (+1.0) 3.5 (+1.0) 3.5 (+1.0) 3.5 (+1.0) 3.5 (+1.0) 3.5 (+0.5) 3.0 (+0.5) 3.0 (+0.5) 3.0 (+0.5) 3.0 (+0.5) 3.0 (+0.0) 2.5 (+0.0) 2.5 (+0.0) 2.5 (+0.0) 2.5 (+0.0) 2.5 (- 0.5) 2.0 (- 0.5) 2.0 (- 0.5) 2.0 (- 0.5) 2.0 (- 0.