Datasheet

A
APEM www.apem.com A-44
BF Series
Paddle Control
PRODUCT SPECIFICATION
TECHNICAL SPECIFICATION
All parameters shown are based on a standard configuration and are provided for guidance only.
Please refer to Apem for assistance on how to achieve the best performance from your chosen configuration.
ENVIRONMENTAL
Storage :
Operating Temperature:
Seal Above Panel:
EMC Emissions:
Life Cycles:
ESD:
EMC Immunity:
Vibration:
-40C to +70C
-25C to +70C
IP67 (Gasket fitted as standard)
5,000,
000 cycles sprung version only.
Detents rated to 2,000,000 cycles.
Complies with EN61000-4-2 (extended)
+/-8KV (20 contacts) & +/-15KV (20 air discharges)
100V/m, 80MHz-2.7GHz, 1KHz
80% sine wave modulation, EN 61000-4-3
(extended)
100Hz - 200Hz @ 0.13g /Hz, total
3.6gRMS (1 Hour in each of the three mutually
perpendicular axes)
Complies with EN 61000-6-
3:2001 CISPR 22:2005 Class B 30MHz - 11GHz
²
ELECTRICAL
Gain (Output Voltage Span):
Output at Centre:
Power Supply:
Switch Outputs:
Sensor Type:
Current Consumption:
Loads:
+/-10% x V to
+/-50% x V
V/2 +/- (5% x Gain)
5V +/-0.5V Transient free
Open Drain, pulled high within
control via 1K5 to 5V, and smoothed to 0V with
100nF
Hall Effect
<20mA
Minimum 10K, preferred 100K+
MECHANICAL
Materials Employed
Weight:
Mechanical Operating Angle:
Max Load to Mechanism:
:
Polyetherimide
Polycarbonate
Stainless Steel
50g
+/- 25 Degrees
Vertical: IK08 (BSEN62262:2002)
Horizontal: 75 N
Note: The company reserves the right to change specifications without notice.