Datasheet

A
BF Series
Paddle Control
MECHANICAL & CONNECTION INFORMATION
1
PIN 1
MECHANISM
SPRUNG TO CENTRE
DETENT POSITIONS
DETENT POSITIONS WITH SPRUNG TO CENTRE
CONNECTIONS
The brand new mechanism design has been developed for strength and long life whilst retaining a superb feel.
The lever springs back to the centre position when released.
The lever ‘clicks’ into a number of preset positions. The internal switches can be configured to trigger
at two of these points.
The lever ‘clicks’ into a number of preset positions and springs back to its centre position when released.
The Paddle is fitted, as standard, with an industry standard 2.54mm pitch 8 way connector.
CONNECTIONS
PIN 1:
PIN 2:
PIN 3:
PIN 4:
PIN 5:
PIN 6:
PIN 7:
PIN 8:
Paddles are supplied with an eight way connector as standard.
5V
Switch 1(+)
0V
Analogue / PWM output 1
Analogue / PWM ouptut 2
0V
Switch 2 (-)
5V
BF SERIES OUTPUT CHARACTERISTICS
40% GAIN DUAL INVERSE OUTPUTS
Note: The company reserves the right to change specifications without notice.
4.5 V
4
3
2
1
0 252010
-10
-20-25
0.5
-12 .5 12 .5
2.5
O utp ut 1
O utp ut 2
Switch 2
On
Switch 1
On
Degrees Deflection
4.5 V
4
3
2
1
0 252010-10-20-25
0.5
2.5
O u tp u t 1
Output 2
Switch 1 On
Switch 2 On
Degrees Deflection SWITCH
OUTPUT
125
175
6k
100 nF
Equivalent circuit for the switch output
5V
1k5
Switches at 12.5 Degrees Switches at 25 Degrees
The two switch outputs are configured as ‘Open Drain’ with a 1K5 pull-up to the 5V.
40% GAIN DUAL OUTPUTS
Switches at 12.5 Degrees Switches at 25 Degrees
10m A
Max
4.5 V
4
3
2
1
0 252010-10-20-25
0.5
-12 .5 12 .5
2.5
Output 1
Output 2
Switch 1
On
D eg rees D eflec tio n
4.5 V
4
3
2
1
0 252010-10-20-25
0.5
2.5
Output 1
Output 2
Switch 1 On
Degrees Deflection
Switch 2
On
Switch 2 On
:
:
:
APEM www.apem.com A-44