Datasheet
K-11
K
APEM
AV SERIES
SECURITY PUSHBUTTON SWITCHES
Bushing Ø 19 (.748)
NO
(function 3)
Flat actuator - AV09..00
Hex nut 22 (.866) across flats
(.748DIAx1.00 IS)
(.531)
ø22.00
(.590DIA)
(.866DIA)
ø15.00
(.078)
2.00
(.098DIA)
(.216)
5.50
13.50
(.196)
5.00
ø2.50
(.118)
3.00
ø19.00x1.00 SI
EPOXY
2.80x0.5
(.110x.019)
1.20
(.047)
2.80
(.110)
7.30
(.287)
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 2A 48 VDC
• Initial contact resistance : 10 mΩ max. at 1A 2V
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
• Electrical life : 10.000 cycles at full load
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 1.000.000 cycles
Screw terminals
AV091003C900
Solder lug /
quick-connect term.
AV091003C200
OTHER CONFIGURATIONS
Curved actuator
Screw terminals
AV191003C900
Solder lug / quick-connect terminals
AV191003C200
With knurled nut for matrix mounting 25 (.984) x 25 (.984)
Flat actuator, screw term. Curved actuator, screw term.
AV9P1003C900 AV9B1003C900
Flat actuator, solder lug term. Curved act., solder lug term.
AV9P1003C200 AV9B1003C200
Wrench available
under P/N U1929.
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing : brass, nickel plated (std)
•
Actuator : brass, nickel plated
(std)
CUT-OUT
• Panel cut-out :
Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
Ø15.00
(.590DIA)
Ø22.00
Ø15.00
(.866DIA)
(.590DIA)
(.177)
4.50
(.866DIA)
Ø22.00
25.00
25.00
25.00
(.984)
(.984)
(.984)
4.50
(.177)
(.078)
(.590DIA)
(.866DIA)
2.00
Ø15.00
Ø22.00
(.141)
3.60
ORDER FORMAT
Series Bush./act.
config.
Case
style
Function Contact
matl.
Term.
type
Bush./act.
material
See ”options” page.
Marking Sealing
AV
09
19
9P
9B
100 3 C
9
2
00
K
BASIC MODEL
All model numbers below are for switches with standard bushing/actuator material, without marking.