Datasheet

B2-80 APEM www.apem.com
B2
AV series
Snap action security pushbutton switches Ø 16 mm (.629)
Momentary (NO)
NO
(function 3)
SPECIFICATIONS
• Travel : 1,60 mm (.063) ± 0,3 mm (.011)
• Max. current/voltage rating with resistive load :
200mA 48 VDC - 100mA 48VDC
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 50.000 cycles at 200mA 48VDC
100.000 cycles at 100mA 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Packaging unit : 60 pieces
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing and actuator : see
“Options” page
CUT-OUT
• Panel cut-out : Ø 16,2 mm
(.637)
• Min. pitch for matrix mounting :
24 mm x 24 mm (.944 x .944)
(AV6P & AV6B : 20 mm x 20 mm)
ORDER FORMAT
Flat or curved actuator - screw terminals
Hex nut 19 (.748) across flats
(.708DIA)
Ø18.00
(.118)
3.00
3.00
(.118)
11.20
9.501.50
Ø16.00X1.00 SI
Ø12.00
(.629DIAX1.00 IS)
(.440)
(.374)(.059)
(.472DIA)
AV16DT1-A
Flat actuator
AV0630C9
Curved actuator
AV1630C9
BASIC MODEL
To order a product, select a basic model below and add the desired options.
Screw terminals for wires 1,5 mm
2
max.
See “Options”
page.
Bushing/act. configur.
06 Flat actuator
16 Curved actuator
08 Curved act.+chamfer
07 Flat act.+chamfer
6P Flat act.+knurled nut
6B Curved act.+knurled nut
S
ERIES
Function
3 NO
Case
0 Short
Contacts
C Brass,
silver pl.
Terminals
9 Screw
AV 3 0 C 9 OPTIONS
With chamfer
Curved actuator Flat actuator
AV0830C9 AV0730C9
(.059)
1.50
(.078)
2.00
With knurled nut for matrix mounting 20 x 20 - AV6P and AV6B
Flat actuator Curved actuator
AV6P30C9 AV6B30C9
FICHIER CAV6PDT1
(.708DIA)
Ø18.00
Ø12.00
(.472DIA)
Ø18.00
(.708DIA) (.708DIA)
Ø18.00
(.472DIA)
Ø12.00
Ø18.00
(.708DIA)
(.787)
20.00
(.787)
20.00
(.787)
20.00
Wrench available
under P/N U1990.