Datasheet

B2-104 APEM www.apem.com
B2
AV series
Security pushbutton switches Ø 22 mm (.866) or 24 mm (.944) with large actuator
Momentary (combined NC+NO)
Combined NC+NO
Recessed actuator - AV22LC
Quick-connect terminals
AV22LC••4
Solder lug terminals
AV22LC••2
Curved actuator - AV22LB
Quick-connect terminals
AV22LB••4
Solder lug terminals
AV22LB••2
SPECIFICATIONS
• Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at 1A 250VAC
100.000 cycles at full load
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Low level or mechanical life : 3.000.000 cycles
• Front panel sealing : IP65
• Hand soldering : 300°C, 5 sec. max.
• Packaging unit : 20 pieces (except black chrome plated : 16 pieces)
MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing and actuator :
see next page.
CUT-OUT
• Panel cut-out : Ø 22,2 mm
(.874) or Ø 24,2 mm (.952)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
or 33 mm x 33 mm (1.299x1.299)
Flat actuator - AV22LP
Hex nut 25 (.984) across flats
1.30
(.051)
Ø20.00
(.787DIA)
(
.141)
3.60
4.00
(.157)
(.019)
0.50
Ø22.00X1.00 SI
(.866DIAX1.00 IS)
Ø26.00
(1.023DIA)
12.80
(.503)
12.50
(.492)
(.118)
3.00
(.250)
2.40
(.279)
(.110X.019)
2.80X0.50
7.10
Quick-connect terminals
AV22LP••4
Solder lug terminals
AV22LP••2
BASIC MODEL
To order a product, select a basic model below or on next page and add the desired bushing/actuator materials.
➞
O-ring
ORDER FORMAT
Bush./actuator
material
See next page
Bushing
diameter
22 22 mm
24 24 mm
S
ERIES
Bush./act.
config.
Act. style
P Flat
B Curved
C Recessed
AV L
Terminals
4 Quick-
connect
2 Solder lug
OPTIONS