Datasheet
B2-102 APEM www.apem.com
B2
AV series
Security pushbutton switches Ø 22 mm (.866)
Illuminated and non-illuminated - latching
ORDER FORMAT
See next
page.
Actuator type
03 Flat
02 Curved
S
ERIES
Bush./act.
config.
Illumin.
0 No
L Illum.
Function
Contacts
AV 1
LED colour
0 No LED
1 Blue
3 Green
5 Yellow
6 Red
E A
Terminals
2 Solder
4 PC
8 Quick-
connect
OPTIONS
SPECIFICATIONS
• Max. current/voltage rating with resistive load : 2A 48 VDC
• LED voltage and consumption : blue 3,5V 10mA, green : 2V 10mA
yellow & red : 2V 20mA (a resistor must be series-connected by the user)**
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 1 000 Vrms 50 Hz min. between terminals
500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 500.000 cycles at 2A 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 4 seconds max.
• Packaging unit : 20 pieces
** Resistor value =
supply voltage - LED forward voltage
LED forward current
MATERIALS
• Case : PA6T UL94-V0
• Contacts : silver
• Actuator and bushing : see
next page
• LED
CUT-OUT
• Panel cut-out :
Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
Non-illuminated - solder lug terminals
Hex nut 25 (.984) across flats
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
4.00
(.157)
Ø25.00
(.984DIA)
3
.80
(.149)
NO
N
C
NC
(.078)
(.500)
(.045)
(.110)
(.090)
(.590DIA)
(.055)
(.019)
0.50
1.40
2.30
2.80
11.50
12.70
2.00
Ø15.00
Flat actuator *
AV03100EA2 ON - ON
Curved actuator
AV02100EA2 ON - ON
To order a product, select a basic
model below and add the desired
options selected on next page.
Illuminated - solder lug terminals
Hex nut 25 (.984) across flats
(.157)
4.00
(.866DIAx1.00 IS)
Ø22.00x1.00 SI
Ø3.20
(.125DIA)
Ø15.00
Ø25.00
2.00
12.70
11.50
2.80
2.30
1.40
0.50
(.019)
(.055)
(.590DIA)
(.984DIA)
(.090)
(.110)
(.045)
(.500)
(.078)
NC
NC
NO
Flat actuator
AV031L•EA2 ON - ON
Replace • with desired LED colour.
* Also available with prominent actuator in the non-latched position
Standard actuator position : the actuator is flush in the non-latched position and recessed in the latched position.